ftp.cc.uoc.gr
rfc3348
This is a purely informative rendering of an RFC that includes verified errata. This rendering may not be used as a reference.

The following 'Verified' errata have been incorporated in this document: EID 2020
Network Working Group                                          M. Gahrns
Request for Comments: 3348                                      R. Cheng
Category: Informational                                        Microsoft
                                                               July 2002


             The Internet Message Action Protocol (IMAP4)
                        Child Mailbox Extension

Status of this Memo

   This memo provides information for the Internet community.  It does
   not specify an Internet standard of any kind.  Distribution of this
   memo is unlimited.

Copyright Notice

   Copyright (C) The Internet Society (2002).  All Rights Reserved.

Abstract

   The Internet Message Action Protocol (IMAP4) CHILDREN extension
   provides a mechanism for a client to efficiently determine if a
   particular mailbox has children, without issuing a LIST "" * or a
   LIST "" % for each mailbox.

1. Conventions used in this document

   In examples, "C:" and "S:" indicate lines sent by the client and
   server respectively.  If such lines are wrapped without a new "C:" or
   "S:" label, then the wrapping is for editorial clarity and is not
   part of the command.

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED",  "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC-2119].

2. Introduction and Overview

   Many IMAP4 [RFC-2060] clients present to the user a hierarchical view
   of the mailboxes that a user has access to.  Rather than initially
   presenting to the user the entire mailbox hierarchy, it is often
   preferable to show to the user a collapsed outline list of the
   mailbox hierarchy (particularly if there is a large number of
   mailboxes).  The user can then expand the collapsed outline hierarchy
   as needed.  It is common to include within the collapsed hierarchy a

   visual clue (such as a "+") to indicate that there are child
   mailboxes under a particular mailbox.  When the visual clue is
   clicked the hierarchy list is expanded to show the child mailboxes.

   Several IMAP vendors implemented this proposal, and it is proposed to
   document this behavior and functionality as an Informational RFC.

   There is interest in addressing the general extensibility of the IMAP
   LIST command through an IMAP LIST Extension draft.  Similar
   functionality to the \HasChildren and \HasNoChildren flags could be
   incorporated into this new LIST Extension.  It is proposed that the
   more general LIST Extension draft proceed on the standards track with
   this proposal being relegated to informational status only.

   If the functionality of the \HasChildren and \HasNoChildren flags
   were incorporated into a more general LIST extension, this would have
   the advantage that a client could then have the opportunity to
   request whether or not the server should return this information.
   This would be an advantage over the current draft for servers where
   this information is expensive to compute, since the server would only
   need to compute the information when it knew that the client
   requesting the information was able to consume it.

3. Requirements

   IMAP4 servers that support this extension MUST list the keyword
   CHILDREN in their CAPABILITY response.

   The CHILDREN extension defines two new attributes that MAY be
   returned within a LIST response.

   \HasChildren - The presence of this attribute indicates that the
   mailbox has child mailboxes.

   Servers SHOULD NOT return \HasChildren if child mailboxes exist, but
   none will be displayed to the current user in a LIST response (as
   should be the case where child mailboxes exist, but a client does not
   have permissions to access them.)  In this case, \HasNoChildren
   SHOULD be used.

   In many cases, however, a server may not be able to efficiently
   compute whether a user has access to all child mailboxes, or multiple
   users may be accessing the same account and simultaneously changing
   the mailbox hierarchy.  As such a client MUST be prepared to accept
   the \HasChildren attribute as a hint.  That is, a mailbox MAY be
   flagged with the \HasChildren attribute, but no child mailboxes will
   appear in a subsequent LIST response.

   Example 3.1:
   ============

   /*** Consider a server that has the following mailbox hierarchy:

   INBOX
   ITEM_1
      ITEM_1A
   ITEM_2
      TOP_SECRET

   Where INBOX, ITEM_1 and ITEM_2 are top level mailboxes.  ITEM_1A is a
   child mailbox of ITEM_1 and TOP_SECRET is a child mailbox of ITEM_2
   that the currently logged on user does NOT have access to.

   Note that in this case, the server is not able to efficiently compute
   access rights to child mailboxes and responds with a \HasChildren
   attribute for mailbox ITEM_2, even though ITEM_2/TOP_SECRET does not
   appear in the list response.  ***/

   C: A001 LIST "" *
   S: * LIST (\HasNoChildren) "/" INBOX
   S: * LIST (\HasChildren) "/" ITEM_1
   S: * LIST (\HasNoChildren) "/" ITEM_1/ITEM_1A
   S: * LIST (\HasChildren) "/" ITEM_2
   S: A001 OK LIST Completed

   \HasNoChildren - The presence of this attribute indicates that the
   mailbox has NO child mailboxes that are accessible to the currently
   authenticated user.  If a mailbox has the \Noinferiors attribute, the
   \HasNoChildren attribute is redundant and SHOULD be omitted in the
   LIST response.

      In some instances a server that supports the CHILDREN extension might 
   not be able to determine whether a mailbox has children.  For example
EID 2020 (Verified) is as follows:

Section: 3

Original Text:

   In some instances a server that supports the CHILDREN extension MAY
   NOT be able to determine whether a mailbox has children.

Corrected Text:

   In some instances a server that supports the CHILDREN extension might
   not be able to determine whether a mailbox has children.
Notes:
The "may not" in this sentence is not normative text, but is just a statement of fact. It should not be rendered as an RFC 2119 term.
it may have difficulty determining whether there are child mailboxes when LISTing mailboxes while operating in a particular namespace. In these cases, a server MAY exclude both the \HasChildren and \HasNoChildren attributes in the LIST response. As such, a client can not make any assumptions about whether a mailbox has children based upon the absence of a single attribute. It is an error for the server to return both a \HasChildren and a \HasNoChildren attribute in a LIST response. It is an error for the server to return both a \HasChildren and a \NoInferiors attribute in a LIST response. Note: the \HasNoChildren attribute should not be confused with the IMAP4 [RFC-2060] defined attribute \Noinferiors which indicates that no child mailboxes exist now and none can be created in the future. The \HasChildren and \HasNoChildren attributes might not be returned in response to a LSUB response. Many servers maintain a simple mailbox subscription list that is not updated when the underlying mailbox structure is changed. A client MUST NOT assume that hierarchy information will be maintained in the subscription list. RLIST is a command defined in [RFC-2193] that includes in a LIST response mailboxes that are accessible only via referral. That is, a client must explicitly issue an RLIST command to see a list of these mailboxes. Thus in the case where a mailbox has child mailboxes that are available only via referral, the mailboxes would appear as \HasNoChildren in response to the LIST command, and \HasChildren in response to the RLIST command. 5. Formal Syntax The following syntax specification uses the augmented Backus-Naur Form (BNF) as described in [ABNF]. Two new mailbox attributes are defined as flag_extensions to the IMAP4 mailbox_list response: HasChildren = "\HasChildren" HasNoChildren = "\HasNoChildren" 6. Security Considerations This extension provides a client a more efficient means of determining whether a particular mailbox has children. If a mailbox has children, but the currently authenticated user does not have access to any of them, the server SHOULD respond with a \HasNoChildren attribute. In many cases, however, a server may not be able to efficiently compute whether a user has access to all child mailboxes. If such a server responds with a \HasChildren attribute, when in fact the currently authenticated user does not have access to any child mailboxes, potentially more information is conveyed about the mailbox than intended. A server designed with such levels of security in mind SHOULD NOT attach the \HasChildren attribute to a mailbox unless the server is certain that the user has access to at least one of the child mailboxes. 7. References [RFC-2060] Crispin, M., "Internet Message Access Protocol - Version 4rev1", RFC 2060, December 1996. [RFC-2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [RFC-2234] Crocker, D. and P. Overell, Editors, "Augmented BNF for Syntax Specifications: ABNF", RFC 2234, November 1997. [RFC-2193] Gahrns, M., "IMAP4 Mailbox Referrals", RFC 2193, September 1997. 8. Acknowledgments The authors would like to thank the participants of several IMC Mail Connect events for their input when this idea was originally presented and refined. 9. Author's Address Mike Gahrns Microsoft One Microsoft Way Redmond, WA, 98052 Phone: (425) 936-9833 EMail: mikega@microsoft.com Raymond Cheng Microsoft One Microsoft Way Redmond, WA, 98052 Phone: (425) 703-4913 EMail: raych@microsoft.com 10. Full Copyright Statement Copyright (C) The Internet Society (2002). All Rights Reserved. This document and translations of it may be copied and furnished to others, and derivative works that comment on or otherwise explain it or assist in its implementation may be prepared, copied, published and distributed, in whole or in part, without restriction of any kind, provided that the above copyright notice and this paragraph are included on all such copies and derivative works. However, this document itself may not be modified in any way, such as by removing the copyright notice or references to the Internet Society or other Internet organizations, except as needed for the purpose of developing Internet standards in which case the procedures for copyrights defined in the Internet Standards process must be followed, or as required to translate it into languages other than English. The limited permissions granted above are perpetual and will not be revoked by the Internet Society or its successors or assigns. This document and the information contained herein is provided on an "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Acknowledgement Funding for the RFC Editor function is currently provided by the Internet Society.