ftp.cc.uoc.gr |

This is a purely informative rendering of an RFC that includes verified errata. This rendering may not be used as a reference.

The following 'Verified' errata have been incorporated in this document: EID 2094, EID 2134, EID 2135, EID 2136, EID 2137, EID 2138, EID 2139, EID 2140, EID 2141, EID 2144, EID 2145, EID 2146, EID 2147, EID 2148, EID 2149, EID 2150, EID 2151, EID 2152, EID 2153, EID 2154, EID 2692

The following 'Verified' errata have been incorporated in this document: EID 2094, EID 2134, EID 2135, EID 2136, EID 2137, EID 2138, EID 2139, EID 2140, EID 2141, EID 2144, EID 2145, EID 2146, EID 2147, EID 2148, EID 2149, EID 2150, EID 2151, EID 2152, EID 2153, EID 2154, EID 2692

Independent Submission V. Dolmatov, Ed. Request for Comments: 5830 Cryptocom, Ltd. Category: Informational March 2010 ISSN: 2070-1721 GOST 28147-89: Encryption, Decryption, and Message Authentication Code (MAC) Algorithms Abstract This document is intended to be a source of information about theExpand Russian Federal standard for electronic encryption, decryption, and message authentication algorithms (GOST 28147-89), which is one of the Russian cryptographic standard algorithms called GOST algorithms. Recently, Russian cryptography is being used inInternet applications, and this document has been created as information for developers and users of GOST 28147-89 for encryption, decryption, and message authentication. Status of This Memo This document is not an Internet Standards Track specification; it is published for informational purposes. This is a contribution to the RFC Series, independently of any other RFC stream. The RFC Editor has chosen to publish this document at its discretion and makes no statement about its value for implementation or deployment. Documents approved for publication by the RFC Editor are not a candidate for any level of Internet Standard; see Section 2 of RFC 5741. Information about the current status of this document, any errata, and how to provide feedback on it may be obtained at http://www.rfc-editor.org/info/rfc5830. Copyright Notice Copyright (c) 2010 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. This document may not be modified, and derivative works of it may not be created, except to format it for publication as an RFC or to translate it into languages other than English. Table of Contents 1. Introduction ....................................................3 1.1. General Information ........................................3 2. Applicability ...................................................3 3. Definitions and Notations .......................................3 3.1. Definitions ................................................3 3.2. Notation ...................................................4 4. General Statements ..............................................4 5. The Electronic Codebook Mode ....................................6 5.1. Encryption of Plain Text in the Electronic Codebook Mode ...6 5.2. Decryption of the Ciphertext in the Electronic Codebook Mode ..............................................9 6. The Counter Encryption Mode ....................................10 6.1. Encryption of Plain Text in the Counter Encryption Mode ...10 6.2. Decryption of Ciphertext in the Counter Encryption Mode ...13 7. The Cipher Feedback Mode .......................................13 7.1. Encryption of Plain Text in the Cipher Feedback Mode ......13 7.2. Decryption of Ciphertext in the Cipher Feedback Mode ......14 8. Message Authentication Code (MAC) Generation Mode ..............15 9. Security Considerations ........................................17 10. Normative References ..........................................17 Appendix A. Values of the Constants C1 and C2 .....................18 Appendix B. Contributors ..........................................19 1. Introduction 1.1. General Information [GOST28147-89] is the unified cryptographic transformation algorithm for information processing systems of different purposes, defining the encryption/decryption rules and the message authentication code (MAC) generation rules. This cryptographic transformation algorithm is intended for hardware or software implementation and corresponds to the cryptographic requirements. It puts no limitations on the encrypted information secrecy level. 2. Applicability GOST 28147-89 defines the encryption/decryption model and MAC generation for a given message (document) that is meant for transmission via insecure public telecommunication channels between data processing systems of different purposes. GOST 28147-89 is obligatory to use in the Russian Federation in all data processing systems providing public services. 3. Definitions and Notations 3.1. Definitions The following terms are used in the standard: Running key: a pseudo-random bit sequence generated by a given algorithm for encrypting plain texts and decrypting encrypted texts. Encryption: the process of transforming plain text to encrypted data using a cipher. MAC: an information string of fixed length that is generated from plain text and a key according to some rule and added to the encrypted data for protection against data falsification. Key: a defined secret state of some parameters of a cryptographic transformation algorithm, that provides a choice of one transformation out of all the possible transformations. Cryptographic protection: data protection using the data cryptographic transformations. Cryptographic transformation: data transformation using encryption and (or) MAC. Decryption: the process of transforming encrypted data to plain text using a cipher. Initialization vector: initial values of plain parameters of aEID 2134 (Verified) is as follows:Section:AbstractOriginal Text:This document is intended to be a source of information about the Russian Federal standard for electronic encryption, decryption, and message authentication algorithms (GOST 28147-89), which is one of the Russian cryptographic standard algorithms called GOST algorithms).Corrected Text:This document is intended to be a source of information about the Russian Federal standard for electronic encryption, decryption, and message authentication algorithms (GOST 28147-89), which is one of the Russian cryptographic standard algorithms called GOST algorithms.Notes:

NoneExpand cryptographic transformation algorithm.Encryption equation: a correlation showing the process of generating encrypted data out of plain text as a result of transformations defined by the cryptographic transformation algorithm. Decryption equation: a correlation showing the process of generating plain text out of encrypted data as a result of transformations defined by the cryptographic transformation algorithm. Cipher: a set of reversible transformations of the set of possibleEID 2136 (Verified) is as follows:Section:3.1Original Text:Initialisation vector: initial values of plain parameters of a cryptographic transformation algorithm.Corrected Text:Initialization vector: initial values of plain parameters of a cryptographic transformation algorithm.Notes:

NoneExpand plain texts onto the set of encrypted data carried out by specified rules with the use of keys.3.2. Notation In this document, the following notations are used: ^ is a power operator. (+) is a bitwise addition of the words of the same length modulo 2. [+] is an addition of 32-bit vectors modulo 2^32. [+]' is an addition of the 32-bit vectors modulo 2^32-1. 1..N is all values from 1 to N. 4. General Statements The structure model of the cryptographic transformation algorithm (a cryptographic model) contains: - a 256-bit key data store (KDS) consisting of eight 32-bit registers (X0, X1, X2, X3, X4, X5, X6, X7); - four 32-bit registers (N1, N2, N3, N4); - two 32-bit registers (N5 and N6) containing constants C1 and C2; - two 32-bit adders modulo 2^32 (CM1, CM3); - a 32-bit adder of bitwise sums modulo 2 (CM2); - a 32-bit adder modulo (2^32-1) (CM4); - an adder modulo 2 (CM5), with no limitation to its width; - a substitution box (K); - a register for a cyclic shift of 11 steps to the top digit (R). A substitution box (S-box) K consists of eight substitution points K1, K2, K3, K4, K5, K6, K7, K8, with 64-bit memory. A 32-bit vector coming to the substitution box is divided into eight successive 4-bit vectors, and each of them is transformed into a 4-bit vector by a corresponding substitution point. A substitution point is a table consisting of 16 lines, each containing four bits. The incoming vector defines the line address in the table, and the contents of that line is the outgoing vector. Then, these 4-bit outgoing vectors are successively combined into a 32-bit vector. Remark: the standard doesn't define any S-boxes. Some of them are defined in [RFC4357]. When adding and cyclically shifting binary vectors, the registers with larger numbers are considered the top digits. When writing a key (W1, W2, ..., W256), Wq = 0..1, q = 1..256, in theEID 2137 (Verified) is as follows:Section:3.1Original Text:Cipher: a set of reversible transformations of the set of possible plain texts onto the set of encrypted data, made after certain rules and using keys.Corrected Text:Cipher: a set of reversible transformations of the set of possible plain texts onto the set of encrypted data carried out by specified rules with the use of keys.Notes:

"After" does not mean "as a result."Expand KDS: - the value W1 is written into the 1st bit of the register X0; - the value W2 is written into the 2nd bit of the register X0 (etc.); - the value W32 is written into the 32nd bit of the register X0; - the value W33 is written into the 1st bit of the register X1; - the value W34 is written into the 2nd bit of the register X1 (etc.); - the value W64 is written into the 32nd bit of the register X1; - the value W65 is written into the 1st bit of the register X2 (etc.); - the value W256 is written into the 32nd bit of the register X7.When rewriting the information, the value of the p-th bit of one register (adder) is written into the p-th bit of another register (adder). The values of the constants C1 and C2 in the registers N5 and N6 are in the Appendix 1. The keys defining fillings of KDS and the substitution box K tables are secret elements and are provided in accordance with the established procedure. The filling of the substitution box K is described in GOST 28147-89 as a long-term key element common for a whole computer network. Usually, K is used as a parameter of algorithm, some possible sets of K are described in [RFC4357]. The cryptographic model contemplates four working modes: - data encryption (decryption) in the electronic codebook (ECB) mode, - data encryption (decryption) in the counter (CNT) mode, - data encryption (decryption) in the cipher feedback (CFB) mode, and - the MAC generation mode. [RFC4357] also describes the CBC mode of GOST 28147-89, but this mode is not a part of the standard. 5. The Electronic Codebook Mode 5.1. Encryption of Plain Text in the Electronic Codebook Mode The plain text to be encrypted is split into 64-bit blocks. Input ofEID 2138 (Verified) is as follows:Section:4Original Text:When writing a key (W1, W2, ..., W256), Wq = 0..1, q = 1..256, in the KDS the value: - W1 is written into the 1st bit of the register X0; - the value W2 is written into the 2nd bit of the register X0 (etc.); - the value W32 is written into the 32nd bit of the register X0; - the value W33 is written into the 1st bit of the register X1; - the value W34 is written into the 2nd bit of the register X1 (etc.); - the value W64 is written into the 32nd bit of the register X1; - the value W65 is written into the 1st bit of the register X2 (etc.); - the value W256 is written into the 32nd bit of the register X7.Corrected Text:When writing a key (W1, W2, ..., W256), Wq = 0..1, q = 1..256, in the KDS: - the value W1 is written into the 1st bit of the register X0; - the value W2 is written into the 2nd bit of the register X0 (etc.); - the value W32 is written into the 32nd bit of the register X0; - the value W33 is written into the 1st bit of the register X1; - the value W34 is written into the 2nd bit of the register X1 (etc.); - the value W64 is written into the 32nd bit of the register X1; - the value W65 is written into the 1st bit of the register X2 (etc.); - the value W256 is written into the 32nd bit of the register X7.Notes:

NoneExpand any binary data block Tp = (a1(0), a2(0), ... , a31(0), a32(0), b1(0), b2(0), ..., b32(0)) into the registers N1 and N2 is done so that the value of a1(0) is put into the first bit of N1, the value of a2(0) is put into the second bit of N1, etc., and the value of a32(0) is put into the 32nd bit of N1. The value of b1(0) is put into the first bit of N2, the value of b2(0) is put into the 2nd bit of N2, etc., and the value of b32(0) is input into the 32nd bit of N2.The result is the state (a32(0), a31(0), ..., a2(0), a1(0)) of the register N1 and the state (b32(0), b31(0), ..., b1(0)) of the register N2. The 256 bits of the key are entered into the KDS. The contents of eight 32-bit registers X0, X1, ..., X7 are: X0 = W32, W31, ..., W2, W1 X1 = W64, W63, ..., W34, W33 . . . . . . . . . . . . . . . X7 = W256, W255, ..., W226, W225 The algorithm for enciphering 64-bit blocks of plain text in the electronic codebook mode consists of 32 rounds. In the first round, the initial value of register N1 is added modulo 2^32 in the adder CM1 to the contents of the register X0. Note: the value of register N1 is unchanged. The result of the addition is transformed in the substitution block K, and the resulting vector is put into the register R, where it is cyclically shifted by 11 steps towards the top digit. The result of this shift is added bitwise modulo 2 in the adder CM2 to the 32-bit contents of the register N2. The result produced in CM2 is then written into N1, and the old contents of N1 are written in N2. Thus, the first round ends. The subsequent rounds are similar to the first one: - in the second round, the contents of X1 are read from the KDS; - in the third round, the contents of X2 are read from the KDS, etc.; - in the 8th round, the contents of X7 are read from the KDS. - in rounds 9 through 16 and 17 through 24, the contents of the KDS are read in the same order: X0, X1, X2, X3, X4, X5, X6, X7. - in the last eight rounds from the 25th to the 32nd, the contents of the KDS are read backwards: X7, X6, X5, X4, X3, X2, X1, X0. Thus, during the 32 rounds of encryption, the following order of choosing the registers' contents is implemented: X0, X1, X2, X3, X4, X5, X6, X7, X0, X1, X2, X3, X4, X5, X6, X7, X0, X1, X2, X3, X4, X5, X6, X7, X7, X6, X5, X4, X3, X2, X1, X0 In the 32nd round, the result in the adder CM2 is written into the register N2, and the old contents of register N1 are unchanged. After the 32nd round, the contents of the registers N1 and N2 are an encrypted data block corresponding to a block of plain text. The equations for enciphering in the electronic codebook mode are: |a(j) = (a(j-1) [+] X(j-1)(mod 8))*K*R (+) b (j-1) | j = 1..24; |b(j) = a(j-1) |a(j) = (a(j-1) [+] X(32-j))*K*R (+) b(j-1) | j = 25..31; a32 = a31; |b(j) = a(j-1) b(32) = (a(31) [+] X0)*K*R (+) b(31) j=32, where: a(0) = (a32(0), a31(0), ..., a1(0)) constitutes the initial contents of N1 before the first round of encryption; b(0) = (b32(0), b31(0), ..., b1(0)) constitutes the initial contents of N2 before the first round of encryption; a(j) = (a32(j), a31(j), ..., a1(j)) constitutes the contents of N1 after the j-th round of encryption; b(j) = (b32(j), b31(j), ..., b1(j)) constitutes the contents of N2 after the j-th round of encryption, j = 1..32. R is the operation of cyclic shift towards the top digit by 11 steps, as follows: R(r32, r31, r30, r29, r28, r27, r26, r25, r24, r23, r22, r21, r20, ..., r2, r1) = (r21, r20, ..., r2, r1, r32, r31, r30, r29, r28, r27, r26, r25, r24, r23, r22) The 64-bit block of ciphertext Tc is taken out of the registers N1, N2 in the following order: the first, second, ..., 32nd bit of the register N1, then the first, second, ..., 32nd bit of the register N2, i.e., Tc = a1(32), a2(32), ..., a32(32), b1(32), b2(32), ..., b32(32)). The remaining blocks of the plain text in electronic codebook mode are encrypted in the same fashion. 5.2. Decryption of the Ciphertext in the Electronic Codebook Mode The same 256-bit key that was used for encryption is loaded into the KDS, the encrypted data to be deciphered is divided into 64-bit blocks. The loading of any binary information block Tc = (a1(32), a2(32), ..., a32(32), b1(32), b2(32), ..., b32(32)) into the registers N1 and N2 is done in such a way that: - the contents of a1(32) are written into the first bit of N1; - the contents of a2(32) are written into the second bit of N1 (and so on); - the contents of a32(32) are written into the 32nd bit of N1; - the contents of b1(32) are written into the first bit of N2 (and so on); - and the contents of b32(32) are written into the 32nd bit of N2. The decryption procedure uses the same algorithm as the encryption of plain text, with one exception: the contents of the registers X0, X1, ..., X7 are read from the KDS in the decryption rounds in the following order: X0,X1,X2,X3,X4,X5,X6,X7, X7,X6,X5,X4,X3,X2,X1,X0, X7,X6,X5,X4,X3,X2,X1,X0, X7,X6,X5,X4,X3,X2,X1,X0. The decryption equations are: |a(32-j) = (a(32-j+1) [+] X(j-1))*K*R (+) b(32-j+1) | j = 1..8; |b(32-1) = a(32-j+1) |a(32-j) = (a(32-j+1) [+] X(j-1)(mod 8))*K*R (+) b(32-j+1) | j = 9..31; |b(32-1) = a(32-j+1) |a(0) = a(1) | j=32. |b(0) = (a(1) [+] X0)*K*R (+) b1 After 32 working rounds contents of registers N1 and N2 are a plain text block.EID 2139 (Verified) is as follows:Section:5.1Original Text:The plain text to be encrypted is split into 64-bit blocks. Input of a binary data block Tp = (a1(0), a2(0), ... , a31(0), a32(0), b1(0), b2(0), ..., b32(0)) into the registers N1 and N2 is done so that the value of a1(0) is put into the first bit of N1, the value of a2(0) is put into the second bit of N1, etc., and the value of a32(0) is put into the 32nd bit of N1. The value of b1(0) is put into the first bit of N2, the value of b2(0) is put into the 2nd bit of N2, etc., and the value of b32(0) is input into the 32nd bit of N2.Corrected Text:The plain text to be encrypted is split into 64-bit blocks. Input of any binary data block Tp = (a1(0), a2(0), ... , a31(0), a32(0), b1(0), b2(0), ..., b32(0)) into the registers N1 and N2 is done so that the value of a1(0) is put into the first bit of N1, the value of a2(0) is put into the second bit of N1, etc., and the value of a32(0) is put into the 32nd bit of N1. The value of b1(0) is put into the first bit of N2, the value of b2(0) is put into the 2nd bit of N2, etc., and the value of b32(0) is input into the 32nd bit of N2.Notes:

NoneExpand Tp = (a1(0), a2(0), ... , a32(0), b1(0), b2(0), ..., b32(0)) corresponding to the encrypted data block: - the value of a1(0) of the block Tp corresponds to the contents of the first bit of N1; - the value of a2(0) corresponds to the contents of the second bit of N1 (etc.); - the value of b1(0) corresponds to the contents of the first bit of N2; - the value of b2(0) corresponds to the contents of the second bit of N2 (etc.); - the value of b32(0) corresponds to the contents of 32nd bit of N2; - the remaining blocks of encrypted data are decrypted similarly. The encryption algorithm in the electronic codebook mode of a 64-bit block Tp is denoted by A, that is: A(Tp) = A(a(0), b(0)) = (a(32), b(32)) = Tc.EID 2140 (Verified) is as follows:Section:5.2Original Text:The fillings of the adders N1 and N2 after 32 working rounds are a plain text block.Corrected Text:After 32 working rounds contents of registers N1 and N2 are a plain text block.Notes:

N1 and N2 aren't adders.Expand 6. The Counter Encryption Mode 6.1. Encryption of Plain Text in the Counter Encryption Mode The plain text divided into 64-bit blocks Tp(1), Tp(2), ..., Tp(M-1), Tp(M) is encrypted in the counter encryption mode by bitwise addition modulo 2 in the adder CM5 with the running key Gc produced in 64-bit blocks, that is: Gc = (Gc(1), Gc(2), ..., Gc(M-1), Gc(M)) where M is defined by the size of the plain text being encrypted. Gc(i) is the i-th 64-bit block where i=1..M, the number of bits in a block Tp(M) can be less than 64. In this case, the unused part of the running key block Gc(M) is discarded. 256 bits of the key are put into the KDS. The registers N1 and N2 accept a 64-bit binary sequence (an initialisation vector) S = (S1, S2, ..., S64), that is, the initial filling of these registers for subsequent generation of M blocks of the running key. The initialisation vector is put into the registers N1 and N2 so: - the value of S1 is written into the first bit of N1;EID 2141 (Verified) is as follows:Section:5.2Original Text:A(Tp) is A(a(0), b(0)) = (a(32), b(32)) = Tc.Corrected Text:A(Tp) = A(a(0), b(0)) = (a(32), b(32)) = Tc.Notes:

NoneExpand - the value of S2 is written into the second bit of N1 (etc.); - the value of S32 is written into the 32nd bit of N1; - the value of S33 is written into the first bit of N2; - the value of S34 is written into the second bit of N2 (etc.); - the value of S64 is written into the 32nd bit of N2.The initial filling of the registers N1 and N2 (the initialisation vector S) is encrypted in the electronic codebook mode in accordance with the requirements from section 5.1. The result of that encryption A(S) = (Y0, Z0) is rewritten into the 32-bit registers N3 and N4 so as the contents of N1 are written into N3, and the contents of N2 are written into N4. The filling of the register N4 is added modulo (2^32-1) in the adder CM4 to the 32-bit constant C1 from the register N6; the result is written into N4. The filling of the register N3 is added modulo 2^32 in the adder CM3 with the 32-bit constant C2 from the register N5; the result is written into N3. The filling of N3 is copied into N1, and the filling of N4 is copied into N2, while the fillings of N3 and N4 are kept. The filling of N1 and N2 is encrypted in the electronic codebook mode according to the requirements of section 5.1. The resulting encrypted filling of N1 and N2 is the first 64-bit block of the running key Gc(1), this block is bitwise added modulo 2 in the adder CM5 with the first 64-bit block of the plain text: Tp(1) = (t1(1), t2(1), ..., t63(1), t64(1)). The result of this addition is a 64-bit block of the encrypted data: Tc(1) = (tau1(1), tau2(1), ..., tau63(1), tau64(1)). The value of tau1(1) of the block Tc(1) is the result of the addition of modulo 2 in the CM5 the value t1(1) of the block Tp(1) to the value of the first bit of N1; the value of tau2(1) of the block Tc(1) is the result of addition modulo 2 in the CM5 the value of t2(1) from the block Tp(1) to the value of the second bit of N1, etc.; the value of tau64(1) of the block Tc(1) is the result of addition modulo 2 in the CM5 of the value t64(1) of the block Tp(1) to the value of the 32nd bit of N2. To get the next 64-bit block of the running key Gc(2), the filling of N4 is added modulo (2^32-1) in the adder CM4 with the constant C1 from N6; the filling of N3 is added modulo 2^32 in the adder CM3 with the constant C2 from N5. The new filling of N3 is copied into N1; the new filling of N4 is copied into N2; the fillings of N3 and N4 are kept. The filling of N1 and N2 is encrypted in the electronic codebook modeEID 2094 (Verified) is as follows:Section:6.1Original Text:- the value of S1 is written into the first bit of N1; - the value of S2 is written into the second bit of N1 (etc.); - the value of S32 is written into the 32nd bit of N1; - the value of S33 is written into the first bit of N2; - the value of S34 is written into the 33th bit of N2 (etc.); - the value of S64 is written into the 32nd bit of N2.Corrected Text:- the value of S1 is written into the first bit of N1; - the value of S2 is written into the second bit of N1 (etc.); - the value of S32 is written into the 32nd bit of N1; - the value of S33 is written into the first bit of N2; - the value of S34 is written into the second bit of N2 (etc.); - the value of S64 is written into the 32nd bit of N2.Notes:

Expand according to the requirements of section 5.1. The resulting encrypted filling of N1 and N2 is the second 64-bit block of the running key Gc(2); this block is bitwise added modulo 2 in the adder CM5 with the second 64-bit block of the plain text Tp(2). Theremaining running key blocks Gc(3), Gc(4), ..., Gc(M) are generated and the plain text blocks Tp(3), Tp(4), ..., Tp(M) are encrypted similarly. If the length of the last M-th block of the plain text is less than 64 bits, then only the corresponding number of bits from the last M-th block of the running key is used; remaining bits are discarded. The initialisation vector S and the blocks of encrypted data Tc(1), Tc(2), ..., Tc(M) are transmitted to the telecommunication channel or to the computer memory. The encryption equation is: Tc(i) = A(Y[i-1] [+] C2, Z[i-1]) [+]' C1) (+) Tp(i) = Gc(i) (+) Tp(i) i=1..M where: Y[i] is the contents of the register N3 after encrypting the i-th block of the plain text Tp(i); Z(i) is the contents of the register N4 after encrypting the i-th block of the plain text Tp(i); (Y[0], Z[0]) = A(S). 6.2. Decryption of Ciphertext in the Counter Encryption Mode 256 bits of the key that was used for encrypting the data Tp(1), Tp(2), ..., Tp(M) are put into the KDS. The initialisation vector S is put into the registers N1 and N2 and, like in the section 6.1 M blocks of the running key, Gc(1), Gc(2), ..., Gc(M) are generated. The encrypted data blocks Tc(1), Tc(2), ..., Tc(M) are added bitwise modulo 2 in the adder CM5 with the blocks of the running key, and this results in the blocks of plain text Tp(1), Tp(2), ..., Tp(M), and Tp(M) may contain less than 64 bit. The decryption equation is: Tp(i) = A (Y[i-1] [+] C2, Z[i-1] [+]' C1) (+) Tc(i) = Gc(i) (+) Tc(i) i = 1..M 7. The Cipher Feedback Mode 7.1. Encryption of Plain Text in the Cipher Feedback Mode The plain text is divided into 64-bit blocks Tp(1), Tp(2), ..., Tp(M)EID 2144 (Verified) is as follows:Section:6.1Original Text:The filling of N1 and N2 is encrypted in the electronic codebook mode according to the requirements of section 5.1. The resulting encrypted filling of N1 and N2 is the second 64-bit block of the running key Gc(2); this block is bitwise added modulo 2 in the adder CM5 with the first 64-bit block of the plain text Tp(2).Corrected Text:The filling of N1 and N2 is encrypted in the electronic codebook mode according to the requirements of section 5.1. The resulting encrypted filling of N1 and N2 is the second 64-bit block of the running key Gc(2); this block is bitwise added modulo 2 in the adder CM5 with the second 64-bit block of the plain text Tp(2).Notes:

NoneExpand Multiple and encrypted in the cipher feedback mode by bitwise addition modulo 2 in the adder CM5 with the running key Gc generated in 64-bit blocks, i.e., Gc(i)=(Gc(1), Gc(2), ..., Gc(M)), where M is defined by the length of the plain text, Gc(i) is the i-th 64-bit block, i=1,M. The number of bits in the block Tp(M) may be less than 64.256 bits of the key are put into the KDS. The 64-bit initialisation vector S = (S1, S2, ..., S64) is put into N1 and N2 as described in section 6.1. The initial filling of N1 and N2 is encrypted in the electronicEID 2135 (Verified) is as follows:Section:7.1Original Text:The plain text is divided into 64-bit blocks Tp(1), Tp(2), ..., Tp(M) and encrypted in the cipher feedback mode by bitwise addition modulo 2 in the adder CM5 with the running key Gc generated in 64-bit blocks, i.e., Gc(i)=(Gc(1), Gc(2), ..., Gc(M)), where M is defined by ___ the length of the plain text, Gc(i) is the i-th 64-bit block, i=1,M. The number of bits in the block Tp(M) may be less than 64.Corrected Text:The plain text is divided into 64-bit blocks Tp(1), Tp(2), ..., Tp(M) and encrypted in the cipher feedback mode by bitwise addition modulo 2 in the adder CM5 with the running key Gc generated in 64-bit blocks, i.e., Gc(i)=(Gc(1), Gc(2), ..., Gc(M)), where M is defined by the length of the plain text, Gc(i) is the i-th 64-bit block, i=1,M. The number of bits in the block Tp(M) may be less than 64.Notes:

NoneEID 2145 (Verified) is as follows:Section:7.1Original Text:The plain text is divided into 64-bit blocks Tp(1), Tp(2), ..., Tp(M) and encrypted in the cipher feedback mode by bitwise addition modulo 2 in the adder CM5 with the running key Gc generated in 64-bit blocks, i.e., Gc(i)=(Gc(1), Gc(2), ..., Gc(M)), where M is defined by ___ the length of the plain text, Gc(i) is the i-th 64-bit block, i=1,M. The number of bits in the block Tp(M) may be less than 64.Corrected Text:The plain text is divided into 64-bit blocks Tp(1), Tp(2), ..., Tp(M) and encrypted in the cipher feedback mode by bitwise addition modulo 2 in the adder CM5 with the running key Gc generated in 64-bit blocks, i.e., Gc(i)=(Gc(1), Gc(2), ..., Gc(M)), where M is defined by the length of the plain text, Gc(i) is the i-th 64-bit block, i=1..M. The number of bits in the block Tp(M) may be less than 64.Notes:

NoneExpand Multiple codebook mode in accordance with the requirements in section 5.1. If resulting encrypted filling N1 and N2 is the first 64-bit block of the running key Gc(1)=A(S), then this block is added bitwise modulo 2 with the first 64-bit block of plain text Tp(1) = (t1(1), t2(1), ..., t64(1)).The result is a 64-bit block of encrypted data Tc(1) = (tau1(1), tau2(1), ..., tau64(1)). The block of encrypted data Tc(1) is simultaneously the initial state of N1 and N2 for generating the second block of the running key Gc(2) and is written on feedback in these registers. Here: - the value of tau1(1) is written into the first bit of N1; - the value of tau2(1) is written into the second bit of N1, etc.; - the value of tau32(1) is written into the 32nd bit of N1; - the value of tau33(1) is written into the first bit of N2; - the value of tau34(1) is written into the second bit of N2, etc.; - the value of tau64(1) is written into the 32nd bit of N2. The filling of N1 and N2 is encrypted in the electronic codebook modeEID 2146 (Verified) is as follows:Section:7.1Original Text:The initial filling of N1 and N2 is encrypted in the electronic codebook mode in accordance with the requirements in section 6.1. If resulting encrypted filling N1 and N2 is the first 64-bit block of the running key Gc(1)=A(S), then this block is added bitwise modulo 2 with the first 64-bit block of plain text Tp(1) = (t1(1), t2(1), ..., t64(1)).Corrected Text:The initial filling of N1 and N2 is encrypted in the electronic codebook mode in accordance with the requirements in section 5.1. If resulting encrypted filling N1 and N2 is the first 64-bit block of the running key Gc(1)=A(S), then this block is added bitwise modulo 2 with the first 64-bit block of plain text Tp(1) = (t1(1), t2(1), ..., t64(1)).Notes:

NoneEID 2148 (Verified) is as follows:Section:7.1Original Text:The initial filling of N1 and N2 is encrypted in the electronic codebook mode in accordance with the requirements in section 6.1. If resulting encrypted filling N1 and N2 is the first 64-bit block of the running key Gc(1)=A(S), then this block is added bitwise modulo 2 with the first 64-bit block of plain text Tp(1) = (t1(1), t2(1), ..., t64(1)).Corrected Text:The initial filling of N1 and N2 is encrypted in the electronic codebook mode in accordance with the requirements in section 6.1. The resulting encrypted filling N1 and N2 is the first 64-bit block of the running key Gc(1)=A(S), then this block is added bitwise modulo 2 in the adder CM5 with the first 64-bit block of plain text Tp(1) = (t1(1), t2(1), ..., t64(1)).Notes:

NoneExpand in accordance with the requirements in the section 5.1. The encrypted filling of N1 and N2 makes the second 64-bit block of the running key Gc(2), this block is added bitwise modulo 2 in the adder CM5 to the second block of the plain text Tp(2).The generation of subsequent blocks of the running key Gc(i) and the encryption of the corresponding blocks of the plain text Tp(i) (i = 3..M) are performed similarly. If the length of the last M-th block of the plain text is less than 64 bits, only the corresponding number of bits of the M-th block of the running key Gc(M) is used; remaining bits are discarded. The encryption equations in the cipher feedback mode are: |Tc(1) = A(S) (+) Tp(1) = Gc(1) (+) Tp(1) | |Tc(i) = A(Tc(i-1)) (+) Tp(i) = Gc(i) + Tp(i), i = 2..M. The initialisation vector S and the blocks of encrypted data Tc(1), Tc(2), ..., Tc(M) are transmitted into the telecommunication channel or to the computer memory. 7.2. Decryption of Ciphertext in the Cipher Feedback Mode 256 bits of the key used for the encryption of Tp(1), Tp(2), ..., Tp(M) are put into the KDS. The initialisation vector S is put into N1 and N2 similar to 6.1. The initial filling of N1 and N2 (the initialisation vector S) isEID 2147 (Verified) is as follows:Section:7.1Original Text:The filling of N1 and N2 is encrypted in the electronic codebook mode in accordance with the requirements in the section 6.1. The encrypted filling of N1 and N2 makes the second 64-bit block of the running key Gc(2), this block is added bitwise modulo 2 in the adder CM5 to the second block of the plain text Tp(2).Corrected Text:The filling of N1 and N2 is encrypted in the electronic codebook mode in accordance with the requirements in the section 5.1. The encrypted filling of N1 and N2 makes the second 64-bit block of the running key Gc(2), this block is added bitwise modulo 2 in the adder CM5 to the second block of the plain text Tp(2).Notes:

NoneExpand encrypted in the electronic codebook mode in accordance with the subsection 5.1. The encrypted filling of N1, N2 is the first block of the running key Gc(1) = A(S), this block is added bitwise modulo 2 in the adder CM5 with the encrypted data block Tc(1). This results in the first block of plain text Tp(1).The block of encrypted data Tc(1) makes the initial filling of N1, N2EID 2149 (Verified) is as follows:Section:7.2Original Text:The initial filling of N1 and N2 (the initialisation vector S) is encrypted in the electronic codebook mode in accordance with the subsection 6.1. The encrypted filling of N1, N2 is the first block of the running key Gc(1) = A(S), this block is added bitwise modulo 2 in the adder CM5 with the encrypted data block Tc(1). This results in the first block of plain text Tp(1).Corrected Text:The initial filling of N1 and N2 (the initialisation vector S) is encrypted in the electronic codebook mode in accordance with the subsection 5.1. The encrypted filling of N1, N2 is the first block of the running key Gc(1) = A(S), this block is added bitwise modulo 2 in the adder CM5 with the encrypted data block Tc(1). This results in the first block of plain text Tp(1).Notes:

NoneExpand for generating the second block of the running key Gc(2). The block Tc(1) is written in N1 and N2 in accordance with the requirements in the subsection 6.1. The filling of N1 and N2 is encrypted in the electronic codebook mode according to the requirements of section 5.1. The encrypted filling of N1 and N2 makes the second 64-bit block Gc(2) which is added bitwise modulo 2 in the adder CM5 to the second block of the encrypted data Tc(2). This results in the block of plain text Tc(2).Similarly, the blocks of encrypted data Tc(2), Tc(3), ..., Tc(M-1) are written in N1, N2 successively, and the blocks of the running key Gc(3), Gc(4), ..., Gc(M) are generated out of them in the electronic codebook mode. The blocks of the running key are added bitwise modulo 2 in the adder CM5 to the blocks of the encrypted data Tc(3), Tc(4), ..., Tc(M), this results in the blocks of plain text Tp(3), Tp(4), ..., Tp(M); here, the number of bits in the last block of the plain text Tp(M) can be less than 64 bit. The decryption equations in the cipher feedback mode are: |Tp(1) = A(S) (+) Tc(1) = Gc(1) (+) Tc(1) | |Tp(1) = A(Tc(i-1)) (+) Tc(i) = Gc(i) (+) Tc(i), i=2..M 8. Message Authentication Code (MAC) Generation Mode To provide the protection from falsification of plain text consisting of M 64-bit blocks Tp(1), Tp(2), ..., Tp(M), M >= 2, an additional l-bit block is generated (the message authentication code I(l)). The process of MAC generation is the same for all the encryption/decryption modes. The first block of plain text:EID 2152 (Verified) is as follows:Section:7.2Original Text:The block of encrypted data Tc(1) makes the initial filling of N1, N2 for generating the second block of the running key Gc(2). The block Tc(1) is written in N1 and N2 in accordance with the requirements in the subsection 6.1, the resulted block Gc(2) is added bitwise modulo 2 in the adder CM5 to the second block of the encrypted data Tc(2). This results in the block of plain text Tc(2).Corrected Text:The block of encrypted data Tc(1) makes the initial filling of N1, N2 for generating the second block of the running key Gc(2). The block Tc(1) is written in N1 and N2 in accordance with the requirements in the subsection 6.1. The filling of N1 and N2 is encrypted in the electronic codebook mode according to the requirements of section 5.1. The encrypted filling of N1 and N2 makes the second 64-bit block Gc(2) which is added bitwise modulo 2 in the adder CM5 to the second block of the encrypted data Tc(2). This results in the block of plain text Tc(2).Notes:

One necessary statement was missed in the text.Expand Tp(1) = (t1(1), t1(2), ..., t64(1)) = (a1(1)[0], a2(1)[0], ..., a32(1)[0], b1(1)[0], b2(1)[0], ..., b32(1)[0])is written to the registers N1 and N2; - the value of t1(1) = a1(1)[0] is written into the first bit of N1; - the value of t2(1) = a2(1)[0] is written into the second bit of N1, etc.; - the value of t32(1) = a32(1)[0] is written into the 32nd bit of N1; - the value of t33(1) = b1(1)[0] is written into the first bit of N2, etc.; - the value of t64(1) = b32(1)[0] is written into the 32nd bit of N2. The filling of N1 and N2 is transformed in accordance with the firstEID 2150 (Verified) is as follows:Section:8Original Text:- The first block of plain text: Tp(1) = (t1(1), t1(2), ..., t64(1)) = (a1(1)[0], a2(1)[0], ..., a32(1)[0], b1(1)[0], b2(1)[0], ..., b32(1)[0])Corrected Text:The first block of plain text: Tp(1) = (t1(1), t1(2), ..., t64(1)) = (a1(1)[0], a2(1)[0], ..., a32(1)[0], b1(1)[0], b2(1)[0], ..., b32(1)[0])Notes:

NoneExpand 16 rounds of the encryption algorithm in the electronic codebook mode (see the subsection 5.1). In the KDS, there exists the same key that is used for encrypting the blocks of plain text Tp(1), Tp(2), ..., Tp(M) in the corresponding blocks of encrypted data Tc(1), Tc(2), ..., Tc(M).The filling of N1 and N2 after the 16 working rounds, looking like (a1(1)[16], a2(1)[16], ..., a32(1)[16], b1(1)[16], b2(1)[16], ..., b32(1)[16]), is added in CM5 modulo 2 to the second block Tp(2) = (t1(2), t2(2), ..., t64(2)). The result of this addition (a1(1)[16](+)t1(2), a2(1)[16](+)t2(2), ..., a32(1)[16](+)t32(2), b1(1)[16](+)t33(2), b2(1)[16](+)t34(2), ..., b32(1)[16](+)t64(2)) = (a1(2)[0], a2(2)[0] ..., a32(2)[0], b1(2)[0], b2(2)[0], ..., b32(2)[0]) is written into N1 and N2 and is transformed in accordance with the first 16 rounds of the encryption algorithm in the electronic codebook mode. The resulting filling of N1 and N2 is added in the CM5 modulo 2 withEID 2151 (Verified) is as follows:Section:8Original Text:The filling of N1 and N2 is transformed in accordance with the first 16 rounds of the encryption algorithm in the electronic codebook mode (see the subsection 6.1). In the KDS, there exists the same key that is used for encrypting the blocks of plain text Tp(1), Tp(2), ..., Tp(M) in the corresponding blocks of encrypted data Tc(1), Tc(2), ..., Tc(M).Corrected Text:The filling of N1 and N2 is transformed in accordance with the first 16 rounds of the encryption algorithm in the electronic codebook mode (see the subsection 5.1). In the KDS, there exists the same key that is used for encrypting the blocks of plain text Tp(1), Tp(2), ..., Tp(M) in the corresponding blocks of encrypted data Tc(1), Tc(2), ..., Tc(M).Notes:

NoneExpand the third block Tp(3), etc., the last block Tp(M) = (t1(M), t2(M), ..., t64(M)), padded if necessary to a complete 64-bit block by zeros, is added in CM5 modulo 2 with the filling N1, N2 (a1(M-1)[16], a2(M-1)[16], ..., a32(M-1)[16], b1(M-1)[16], b2(M-1)[16], ..., b32(M-1)[16]).The result of the addition (a1(M-1)[16](+)t1(M), a2(M-1)[16](+)t2(M), ..., a32(M-1)[16](+) t32(M), b1(M-1)[16](+)t33(M), b2(M-1)[16](+)t34(M), ..., b32(M-1)[16](+)t64(M)) = (a1(M)[0], a2(M)[0] ..., a32(M)[0], b1(M)[0], b2(M)[0], ..., b32(M)[0]) is written into N1, N2 and encrypted in the electronic codebook mode after the first 16 rounds of the algorithm's work. Out of the resulting filling of the registers N1 and N2: (a1(M)[16], a2(M)[16] ..., a32(M)[16], b1(M)[16], b2(M)[16], ..., b32(M)[16]) an l-bit string I(l) (the MAC) is chosen: I(l) = [a(32-l+1)(M)[16], a(32-l+2)(M)[16], ..., a32(M)[16]]. The MAC I(l) is transmitted through the telecommunication channel or to the computer memory attached to the end of the encrypted data, i.e., Tc(1), Tc(2), ..., Tc(M), I(l). he encrypted data Tc(1), Tc(2), ..., Tc(M), when arriving, areEID 2153 (Verified) is as follows:Section:8Original Text:The resulting filling of N1 and N2 is added in the CM5 modulo 2 with the third block Tp(3), etc., the last block Tp(M) = (t1(M), t2(M), ..., t64(M)), padded if necessary to a complete 64-bit block by zeros, is added in CM5 modulo 2 with the filling N1, N2 (a1(M-1)[16], a2(M-1)[16], ..., a32(M-1)[16], b1(M-1)[16], b2(M-1)[16], ..., b32(M-1)[16]).Corrected Text:The resulting filling of N1 and N2 is added in the CM5 modulo 2 with the third block Tp(3), etc., the last block Tp(M) = (t1(M), t2(M), ..., t64(M)), padded if necessary to a complete 64-bit block by zeros, is added in CM5 modulo 2 with the filling N1, N2 (a1(M-1)[16], a2(M-1)[16], ..., a32(M-1)[16], b1(M-1)[16], b2(M-1)[16], ..., b32(M-1)[16]).Notes:

NoneExpand decrypted, out of the resulting plain text blocks Tp(1), Tp(2), ..., Tp(M). The MAC I'(l) is generated as described above and compared with the MAC I(l) received together with the encrypted data from the telecommunication channel or from the computer memory. If the MACs are not equal, the resulting plain text blocks Tp(1), Tp(2), ..., Tp(M) are considered false.The MAC I(l) (I'(l)) can be generated either before encryption (after decryption, respectively) of the whole message or simultaneously with the encryption (decryption) in blocks. The first plain text blocks, used in the MAC generation, can contain service information (the address section, a time mark, the initialisation vector, etc.) and they may be unencrypted. The parameter l value (the bit length of the MAC) is defined by the actual cryptographic requirements, while considering that the possibility of imposing false data is 2^-l. 9. Security Considerations This entire document is about security considerations. 10. Normative References [GOST28147-89] "Cryptographic Protection for Data Processing System", GOST 28147-89, Gosudarstvennyi Standard of USSR, Government Committee of the USSR for Standards, 1989. (In Russian) [RFC4357] Popov, V., Kurepkin, I., and S. Leontiev, "Additional Cryptographic Algorithms for Use with GOST 28147-89, GOST R 34.10-94, GOST R 34.10-2001, and GOST R 34.11-94 Algorithms", RFC 4357, January 2006. Appendix A. Values of the Constants C1 and C2 The constant C1 is:EID 2154 (Verified) is as follows:Section:8Original Text:The encrypted data Tc(1), Tc(2), ..., Tc(M), when arriving, are decrypted, out of the resulting plain text blocks Tp(1), Tp(2), ..., Tp(M). The MAC I'(l) is generated as described in the subsection 5.3 and compared with the MAC I(l) received together with the encrypted data from the telecommunication channel or from the computer memory. If the MACs are not equal, the resulting plain text blocks Tp(1), Tp(2), ..., Tp(M) are considered false.Corrected Text:he encrypted data Tc(1), Tc(2), ..., Tc(M), when arriving, are decrypted, out of the resulting plain text blocks Tp(1), Tp(2), ..., Tp(M). The MAC I'(l) is generated as described above and compared with the MAC I(l) received together with the encrypted data from the telecommunication channel or from the computer memory. If the MACs are not equal, the resulting plain text blocks Tp(1), Tp(2), ..., Tp(M) are considered false.Notes:

wrong reference to the original text sectionsExpand The bit of N6 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 The bit value 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 The bit of N6 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 The bit value 1 0 0 0 0 0 0 0 1 0 0 0 0 0 1 0 0 The constant C2 is: The bit of N5 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 The bit value 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 The bit of N5 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 The bit value 1 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 1Appendix B. Contributors Dmitry Kabelev Cryptocom, Ltd. 14 Kedrova St., Bldg. 2 Moscow, 117218 Russian Federation EMail: kdb@cryptocom.ru Igor Ustinov Cryptocom, Ltd. 14 Kedrova St., Bldg. 2 Moscow, 117218 Russian Federation EMail: igus@cryptocom.ru Irene Emelianova Cryptocom Ltd. 14 Kedrova St., Bldg. 2 Moscow, 117218 Russian Federation EMail: irene@cryptocom.ru Author's Address Vasily Dolmatov, Ed. Cryptocom, Ltd. 14 Kedrova St., Bldg. 2 Moscow, 117218 Russian Federation EMail: dol@cryptocom.ruEID 2692 (Verified) is as follows:Section:Appendix AOriginal Text:The constant C1 is: The bit of N6 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 The bit value 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 The bit of N6 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 The bit value 1 0 0 0 0 0 0 0 1 0 0 0 0 0 1 0 0 The constant C2 is: The bit of N6 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 The bit value 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 The bit of N6 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 The bit value 1 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 1Corrected Text:The constant C1 is: The bit of N6 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 The bit value 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 The bit of N6 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 The bit value 1 0 0 0 0 0 0 0 1 0 0 0 0 0 1 0 0 The constant C2 is: The bit of N5 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 The bit value 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 The bit of N5 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 The bit value 1 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 1Notes:

C1 is stored in N6 and C2 is stored in N5 (not both in N6)ftpadm [at] cc . uoc . gr