ftp.cc.uoc.gr
rfc5908
This is a purely informative rendering of an RFC that includes verified errata. This rendering may not be used as a reference.

The following 'Verified' errata have been incorporated in this document: EID 3624
Internet Engineering Task Force (IETF)                        R. Gayraud
Request for Comments: 5908                                  Unaffiliated
Category: Standards Track                                   B. Lourdelet
ISSN: 2070-1721                                      Cisco Systems, Inc.
                                                               June 2010


          Network Time Protocol (NTP) Server Option for DHCPv6

Abstract

   The NTP Server Option for Dynamic Host Configuration Protocol for
   IPv6 (DHCPv6) provides NTPv4 (Network Time Protocol version 4) server
   location information to DHCPv6 hosts.

Status of This Memo

   This is an Internet Standards Track document.

   This document is a product of the Internet Engineering Task Force
   (IETF).  It represents the consensus of the IETF community.  It has
   received public review and has been approved for publication by the
   Internet Engineering Steering Group (IESG).  Further information on
   Internet Standards is available in Section 2 of RFC 5741.

   Information about the current status of this document, any errata,
   and how to provide feedback on it may be obtained at
   http://www.rfc-editor.org/info/rfc5908.

Copyright Notice

   Copyright (c) 2010 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1. Introduction ....................................................2
   2. Requirements Notation ...........................................2
   3. Related Work and Usage Model ....................................2
   4. NTP Server Option for DHCPv6 ....................................3
      4.1. NTP Server Address Suboption ...............................4
      4.2. NTP Multicast Address Suboption ............................5
      4.3. NTP Server FQDN Suboption ..................................6
   5. Appearance of This Option .......................................6
   6. Security Considerations .........................................7
   7. RFC 4075 Deprecation ............................................7
   8. IANA Considerations .............................................7
   9. References ......................................................8
      9.1. Normative References .......................................8
      9.2. Informative References .....................................8

1.  Introduction

   This document defines a DHCPv6 option and associated suboptions to
   provide Network Time Protocol version 4 [RFC5905] or greater server
   location information to DHCPv6 hosts.

2.  Requirements Notation

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].

3.  Related Work and Usage Model

   The NTP service is publicly offered on the Internet by a number of
   organizations.  Those servers can be used but should not be abused,
   so any method that is tasked to disseminate locations of NTP servers
   must act responsibly in a manner that does not lead to public server
   overloading.  When using DHCPv6 to offer NTP server location, and if
   there is a need to distribute a host with a hardcoded configuration,
   this configuration MUST NOT include server location that is not part
   of the organization that distributes this device.  Typical usage of
   this option is to specify an NTP server that is part of the
   organization that operates the DHCPv6 server.

   The location of the NTP service, like any other Internet service, can
   be specified by an IP address or a Fully Qualified Domain Name
   (FQDN).  By design, DHCP offers information to multiple devices and
   is prone to amplification of mistakes, so great care must be taken to
   define its configuration.  Specification of the NTP service by FQDN
   offers a level of indirection that works as a possible mitigation

   tool in case of misconfiguration.  DNS can be used to redirect
   misconfigured clients to an IPv6 address that is not configured on
   any host instead of having to change the address of the NTP server
   itself.

   While the NTP specification defines a comprehensive set of
   configuration parameters, modification of those parameters is best
   left to the decision of the client itself.  The DHCPv6 option for NTP
   is therefore restricted to server location.

4.  NTP Server Option for DHCPv6

   This option serves as a container for server location information
   related to one NTP server or Simple Network Time Protocol (SNTP)
   [RFC4330] server.  This option can appear multiple times in a DHCPv6
   message.  Each instance of this option is to be considered by the NTP
   client or SNTP client as a server to include in its configuration.

   The option itself does not contain any value.  Instead, it contains
   one or several suboptions that carry NTP server or SNTP server
   location.  This option MUST include one, and only one, time source
   suboption.   
The currently defined time source suboptions are
NTP_SUBOPTION_SRV_ADDR, NTP_SUBOPTION_MC_ADDR, and NTP_SUBOPTION_SRV_FQDN.

EID 3624 (Verified) is as follows:

Section: 4

Original Text:

[...]
The currently defined time source suboptions are
NTP_OPTION_SRV_ADDR, NTP_OPTION_SRV_MC_ADDR, and NTP_OPTION_SRV_FQDN.
[...]

Corrected Text:

[...]
The currently defined time source suboptions are
NTP_SUBOPTION_SRV_ADDR, NTP_SUBOPTION_MC_ADDR, and NTP_SUBOPTION_SRV_FQDN.
[...]
Notes:
It does not appear clearly if the type of error must be technical or editorial.

The three suboptions are defined in the sections 4.1, 4.2 and 4.3. Their names are differents of those used in second paragraph of the section 4.

Iana standardized the 4.1, 4.2 and 4.3 names. see:
http://www.iana.org/assignments/bootp-dhcp-parameters/bootp-dhcp-parameters.xml
[...]
Value Name Reference
1 NTP_SUBOPTION_SRV_ADDR [RFC5908]
2 NTP_SUBOPTION_MC_ADDR [RFC5908]
3 NTP_SUBOPTION_SRV_FQDN [RFC5908]
[...]
It carries the NTP server or SNTP server location as a unicast or multicast IPv6 address or as an NTP server or SNTP server FQDN. More time source suboptions may be defined in the future. While the FQDN option offers the most deployment flexibility, resiliency as well as security, the IP address options are defined to cover cases where a DNS dependency is not desirable. If the NTP server or SNTP server location is an IPv6 multicast address, the client SHOULD use this address as an NTP multicast group address and listen to messages sent to this group in order to synchronize its clock. The format of the NTP Server Option is: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | OPTION_NTP_SERVER | option-len | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | suboption-1 | : : +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | suboption-2 | : : +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ : : +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | suboption-n | : : +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ option-code: OPTION_NTP_SERVER (56), option-len: Total length of the included suboptions. This document does not define any priority relationship between the client's embedded configuration (if any) and the NTP or SNTP servers discovered via this option. In particular, the client is allowed to simultaneously use its own configured NTP servers or SNTP servers and the servers discovered via DHCP. 4.1. NTP Server Address Suboption This suboption is intended to appear inside the OPTION_NTP_SERVER option. It specifies the IPv6 unicast address of an NTP server or SNTP server available to the client. The format of the NTP Server Address Suboption is: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | NTP_SUBOPTION_SRV_ADDR | suboption-len = 16 | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | | | | | IPv6 address of NTP server | | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ IPv6 address of the NTP server: An IPv6 address, suboption-code: NTP_SUBOPTION_SRV_ADDR (1), suboption-len: 16. 4.2. NTP Multicast Address Suboption This suboption is intended to appear inside the OPTION_NTP_SERVER option. It specifies the IPv6 address of the IPv6 multicast group address used by NTP on the local network. The format of the NTP Multicast Address Suboption is: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | NTP_SUBOPTION_MC_ADDR | suboption-len = 16 | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | | | | | Multicast IPv6 address | | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Multicast IPv6 address: An IPv6 address, suboption-code: NTP_SUBOPTION_MC_ADDR (2), suboption-len: 16. 4.3. NTP Server FQDN Suboption This suboption is intended to appear inside the OPTION_NTP_SERVER option. It specifies the FQDN of an NTP server or SNTP server available to the client. The format of the NTP Server FQDN Suboption is: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | NTP_SUBOPTION_SRV_FQDN | suboption-len | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | | | FQDN of NTP server | : : +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ suboption-code: NTP_SUBOPTION_SRV_FQDN (3), suboption-len: Length of the included FQDN field, FQDN: Fully-Qualified Domain Name of the NTP server or SNTP server. This field MUST be encoded as described in [RFC3315], Section 8. Internationalized domain names are not allowed in this field. 5. Appearance of This Option The OPTION_NTP_SERVER option can appear multiple times in a DHCPv6 message. The order in which these options appear is not significant. The client uses its usual algorithms to determine which server(s) or multicast group(s) should be preferred to synchronize its clock. The OPTION_NTP_SERVER option MUST NOT appear in messages other than the following: Solicit, Advertise, Request, Renew, Rebind, Information-Request, and Reply. If this option appears in messages other than those specified above, the receiver MUST ignore it. The option number for this option MAY appear in the "Option Request" option [RFC3315] in the following messages: Solicit, Request, Renew, Rebind, Information-Request, and Reconfigure. If this option number appears in the "Option Request" option in messages other than those specified above, the receiver SHOULD ignore it. 6. Security Considerations This option could be used by an intruder to advertise the address of a malicious NTP server or SNTP server and adversely affect the clock of clients on the network. The consequences of such an attack can be critical, because many security protocols depend on time synchronization to run their algorithms. As an example, an attacker could break connectivity between SEND-enabled nodes [RFC3971], simply by affecting the clock on these nodes. To prevent these attacks, it is strongly advisable to secure the use of this option by either: - using the NTPv4 Autokey public key authentication, as defined in [RFC5906] or, - using authenticated DHCP as described in [RFC3315], Section 21. 7. RFC 4075 Deprecation "Simple Network Time Protocol (SNTP) Configuration Option for DHCPv6" [RFC4075] provides some degree of automatic time server configuration for IPv6, as it specifies how to transmit SNTP [RFC4330] server addresses through DHCPv6. However, this approach is not suitable for all NTP deployments. It is not an extensible mechanism and introduces some semantic confusion through the use of the "SNTP" acronym. Additionally, the approach of only offering IPv6 addresses to specify server location does not meet NTP requirements that make use of an FQDN (Fully-Qualified Domain Name) as well. For all the abovementioned reasons, this document makes [RFC4075] deprecated. 8. IANA Considerations IANA has assigned 56 as an option code from the "DHCPv6 Options Codes" registry for OPTION_NTP_SERVER. IANA is required to maintain a new number space of NTP time source suboptions, located in the BOOTP-DHCP Parameters Registry. The initial suboptions are described in Section 4 of this document. IANA assigns future NTP time source suboptions with an "IETF Consensus" policy as described in [RFC5226]. Future proposed suboptions are to be referenced symbolically in the documents that describe them, and shall be assigned numeric codes by IANA when approved for publication as an RFC. 9. References 9.1. Normative References [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [RFC3315] Droms, R., Bound, J., Volz, B., Lemon, T., Perkins, C., and M. Carney, "Dynamic Host Configuration Protocol for IPv6 (DHCPv6)", RFC 3315, July 2003. [RFC5226] Narten, T. and H. Alvestrand, "Guidelines for Writing an IANA Considerations Section in RFCs", BCP 26, RFC 5226, May 2008. [RFC5905] Mills, D., Martin, J., Ed., Burbank, J., and W. Kasch, "Network Time Protocol Version 4: Protocol and Algorithms Specification", RFC 5905, June 2010. [RFC5906] Haberman, B., Ed. and D. Mills, "Network Time Protocol Version 4: Autokey Specification", RFC 5906, June 2010. 9.2. Informative References [RFC3971] Arkko, J., Kempf, J., Zill, B., and P. Nikander, "SEcure Neighbor Discovery (SEND)", RFC 3971, March 2005. [RFC4075] Kalusivalingam, V., "Simple Network Time Protocol (SNTP) Configuration Option for DHCPv6", RFC 4075, May 2005. [RFC4330] Mills, D., "Simple Network Time Protocol (SNTP) Version 4 for IPv4, IPv6 and OSI", RFC 4330, January 2006. Authors' Addresses Richard Gayraud Unaffiliated EMail: richardgayraud@free.fr Benoit Lourdelet Cisco Systems, Inc. Village ent. GreenSide, Bat T3, 400, Av de Roumanille, 06410 BIOT - Sophia-Antipolis Cedex France Phone: +33 4 97 23 26 23 EMail: blourdel@cisco.com