ftp.cc.uoc.gr
rfc5915
This is a purely informative rendering of an RFC that includes verified errata. This rendering may not be used as a reference.

The following 'Verified' errata have been incorporated in this document: EID 2698, EID 3962
Internet Engineering Task Force (IETF)                         S. Turner
Request for Comments: 5915                                          IECA
Category: Informational                                         D. Brown
ISSN: 2070-1721                                                 Certicom
                                                               June 2010


                  Elliptic Curve Private Key Structure

Abstract

   This document specifies the syntax and semantics for conveying
   Elliptic Curve (EC) private key information.  The syntax and
   semantics defined herein are based on similar syntax and semantics
   defined by the Standards for Efficient Cryptography Group (SECG).

Status of This Memo

   This document is not an Internet Standards Track specification; it is
   published for informational purposes.

   This document is a product of the Internet Engineering Task Force
   (IETF).  It represents the consensus of the IETF community.  It has
   received public review and has been approved for publication by the
   Internet Engineering Steering Group (IESG).  Not all documents
   approved by the IESG are a candidate for any level of Internet
   Standard; see Section 2 of RFC 5741.

   Information about the current status of this document, any
   errata, and how to provide feedback on it may be obtained at
   http://www.rfc-editor.org/info/rfc5915.

Copyright Notice

   Copyright (c) 2010 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

1.  Introduction

   This document specifies a syntax and semantics for Elliptic Curve
   (EC) private key information.  EC private key information includes a
   private key and parameters.  Additionally, it may include the
   corresponding public key.  The syntax and semantics defined herein
   are based on similar syntax and semantics defined by the Standards
   for Efficient Cryptography Group (SECG) [SECG1].

   Most Public Key Infrastructures (PKIs) mandate local key generation;
   however, there are some PKIs that also support centralized key
   generation (e.g., the public-private key pair is generated by a
   Certification Authority).  The structure defined in this document
   allows the entity that generates the private and public keys to
   distribute the key pair and the associated domain parameters.

   This syntax is useful when distributing EC private keys using
   PrivateKeyInfo, as defined in PKCS #8 [RFC5208].  Distributing an EC
   private key with PKCS#8 [RFC5208] involves including:

   a) id-ecPublicKey, id-ecDH, or id-ecMQV (from [RFC5480]) with the
      namedCurve as the parameters in the privateKeyAlgorithm field; and
   b) ECPrivateKey in the PrivateKey field, which is an OCTET STRING.

   When an EC public key is included in the distributed PrivateKeyInfo,
   the publicKey field in ECPrivateKey is used.

2.  Terminology

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].

3.  Elliptic Curve Private Key Format

   This section gives the syntax for an EC private key.
   Computationally, an EC private key is an unsigned integer, but for
   representation, EC private key information SHALL have ASN.1 type
   ECPrivateKey:

      ECPrivateKey ::= SEQUENCE { 
     version        INTEGER { ecPrivkeyVer1(1) } (ecPrivkeyVer1),
     privateKey     OCTET STRING,
     parameters [0] ECParameters  OPTIONAL,
     publicKey  [1] BIT STRING OPTIONAL
   }
EID 3962 (Verified) is as follows:

Section: 3 and A

Original Text:

   ECPrivateKey ::= SEQUENCE {
     version        INTEGER { ecPrivkeyVer1(1) } (ecPrivkeyVer1),
     privateKey     OCTET STRING,
     parameters [0] ECParameters {{ NamedCurve }} OPTIONAL,
     publicKey  [1] BIT STRING OPTIONAL
   }

Corrected Text:

   ECPrivateKey ::= SEQUENCE {
     version        INTEGER { ecPrivkeyVer1(1) } (ecPrivkeyVer1),
     privateKey     OCTET STRING,
     parameters [0] ECParameters  OPTIONAL,
     publicKey  [1] BIT STRING OPTIONAL
   }
Notes:
ECParameters is not a parametrized type. This means that it cannot be used as a parameterized type by passing in the NamedCurve set as a parameter.
The fields of type ECPrivateKey have the following meanings: o version specifies the syntax version number of the elliptic curve private key structure. For this version of the document, it SHALL be set to ecPrivkeyVer1, which is of type INTEGER and whose value is one (1). o privateKey is the private key. It is an octet string of length ceiling (log2(n)/8) (where n is the order of the curve) obtained from the unsigned integer via the Integer-to-Octet-String- Primitive (I2OSP) defined in [RFC3447]. o parameters specifies the elliptic curve domain parameters associated to the private key. The type ECParameters is discussed in [RFC5480]. As specified in [RFC5480], only the namedCurve CHOICE is permitted. namedCurve is an object identifier that fully identifies the required values for a particular set of elliptic curve domain parameters. Though the ASN.1 indicates that the parameters field is OPTIONAL, implementations that conform to this document MUST always include the parameters field. o publicKey contains the elliptic curve public key associated with the private key in question. The format of the public key is specified in Section 2.2 of [RFC5480]. Though the ASN.1 indicates publicKey is OPTIONAL, implementations that conform to this document SHOULD always include the publicKey field. The publicKey field can be omitted when the public key has been distributed via another mechanism, which is beyond the scope of this document. Given the private key and the parameters, the public key can always be recomputed; this field exists as a convenience to the consumer. 4. Other Considerations When generating a transfer encoding, generators SHOULD use Distinguished Encoding Rules (DER) [X.690] and receivers SHOULD be prepared to handle Basic Encoding Rules (BER) [X.690] and DER [X.690]. Section 1 described a format for transporting EC private keys (i.e., converting ECPrivateKey to PrivateKeyInfo [PKCS#8]); however, this format can also be used for local storage. Local storage of an unencrypted ECPrivateKey object is out of scope of this document. However, one popular format uses the .pem file extension. It is the PEM encoding, which is the Base64 encoding (see Section 4 of [RFC4648]), of the DER-encoded ECPrivateKey object that is sandwiched between: -----BEGIN EC PRIVATE KEY----- -----END EC PRIVATE KEY----- Another local storage format uses the .der file extension. In this case, it is a DER [X.690] encoding of the ECPrivateKey object. Local storage of an encrypted ECPrivateKey object is out of scope of this document. However, ECPrivateKey should be the format for the plaintext key being encrypted. DER [X.690] encoding the ECPrivateKey will promote interoperability if the key is encrypted for transport to another party. PEM encoding the DER-encoded ECPrivateKey is common; "Proc-Type:" and "DEK-Info:" fields [RFC1421] (each on a new line), followed by a blank line, and then followed by the Base64 encoding (see Section 4 of [RFC4648]) of the DER-encoded ECPrivateKey are sandwiched between:
EID 2698 (Verified) is as follows:

Section: 4

Original Text:

PEM encoding the DER-encoded ECPrivateKey is
common; "Proc-Type:" and "DEK-INFO:" fields [RFC1421] followed by the
DER-encoded ECPrivateKey are sandwiched between:

Corrected Text:

PEM encoding the DER-encoded ECPrivateKey is
common; "Proc-Type:" and "DEK-Info:" fields [RFC1421] (each on a new line),
followed by a blank line, and then followed by the Base64 encoding (see
Section 4 of [RFC4648]) of the DER-encoded ECPrivateKey are sandwiched
between:
Notes:
Needed to indicate that the Proc-Type and DEK-Info are on separate lines and that there is a blank line between the DEK-Info and the ECPrivateKey. Also it's not clear that the ECPrivateKey structure is PEM encoded during this process - it is. And finally, "DEK-INFO" should really have been "DEK-Info". This aligns with current industry practice.
-----BEGIN EC PRIVATE KEY----- -----END EC PRIVATE KEY----- 5. Security Considerations This structure does not protect the EC private key information in any way. This structure should be combined with a security protocol to protect it. Protection of the private key information is vital to public key cryptography. The consequences of disclosure depend on the purpose of the private key. If a private key is used for signature, then the disclosure allows unauthorized signing. If a private key is used for key management, then disclosure allows unauthorized parties to access the managed keying material. The encryption algorithm used in the encryption process must be as 'strong' as the key it is protecting. 6. References 6.1. Normative References [RFC1421] Linn, J., "Privacy Enhancement for Internet Electronic Mail: Part I: Message Encryption and Authentication Procedures", RFC 1421, February 1993. [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [RFC3447] Jonsson, J. and B. Kaliski, "Public-Key Cryptography Standards (PKCS) #1: RSA Cryptography Specifications Version 2.1", RFC 3447, February 2003. [RFC4648] Josefsson, S., "The Base16, Base32, and Base64 Data Encodings", RFC 4648, October 2006. [RFC5480] Turner, S., Brown, D., Yiu, K., Housley, R., and T. Polk, "Elliptic Curve Cryptography Subject Public Key Information", RFC 5480, March 2009. [RFC5912] Schaad, J. and P. Hoffman, "New ASN.1 Modules for the Public Key Infrastructure Using X.509 (PKIX)" RFC 5912, June 2010. [SECG1] Standards for Efficient Cryptography Group (SECG), "SEC 1: Elliptic Curve Cryptography", Version 2.0, May 2009. [X.680] ITU-T Recommendation X.680 (2002) | ISO/IEC 8824-1:2002, Information Technology - Abstract Syntax Notation One. [X.681] ITU-T Recommendation X.681 (2002) | ISO/IEC 8824-2:2002, Information Technology - Abstract Syntax Notation One: Information Object Specification. [X.682] ITU-T Recommendation X.682 (2002) | ISO/IEC 8824-3:2002, Information Technology - Abstract Syntax Notation One: Constraint Specification. [X.683] ITU-T Recommendation X.683 (2002) | ISO/IEC 8824-4:2002, Information Technology - Abstract Syntax Notation One: Parameterization of ASN.1 Specifications, 2002. [X.690] ITU-T Recommendation X.690 (2002) | ISO/IEC 8825-1:2002, Information Technology - ASN.1 encoding rules: Specification of Basic Encoding Rules (BER), Canonical Encoding Rules (CER) and Distinguished Encoding Rules (DER). 7.2. Informative References [RFC5208] Kaliski, B., "Public-Key Cryptography Standards (PKCS) #8: Private-Key Information Syntax Specification Version 1.2", RFC 5208, May 2008. Appendix A. ASN.1 Module This appendix provides ASN.1 definitions for the structures described in this specification using ASN.1 as defined in [X.680], [X.681], [X.682], and [X.683] for compilers that support the 2002 ASN.1. ECPrivateKey { iso(1) identified-organization(3) dod(6) internet(1) security(5) mechanisms(5) pkix(7) id-mod(0) id-mod-ecprivateKey(65) } DEFINITIONS EXPLICIT TAGS ::= BEGIN -- EXPORTS ALL; IMPORTS -- FROM New PKIX ASN.1 [RFC5912] ECParameters, NamedCurve FROM PKIXAlgs-2009 { iso(1) identified-organization(3) dod(6) internet(1) security(5) mechanisms(5) pkix(7) id-mod(0) id-mod-pkix1-algorithms2008-02(56) } ; ECPrivateKey ::= SEQUENCE { version INTEGER { ecPrivkeyVer1(1) } (ecPrivkeyVer1), privateKey OCTET STRING, parameters [0] ECParameters {{ NamedCurve }} OPTIONAL, publicKey [1] BIT STRING OPTIONAL } END Appendix B. Differences with SECG1 This appendix lists the differences between this document and [SECG1]: 1. This document uses the I2OSP routine defined in [RFC3447] while SECG1 defines its own routine. The two routines result in the same output. 2. SECG1 constrains its parameters (i.e., the curves) to SECGCurveNames. This document constrains the parameters to NamedCurve from [RFC5480]. 3. This document requires parameters be present while SECG1 does not. 4. This document specifies requirements for encoding rules while SECG1 did not. Acknowledgements The authors would like to thank Simon Blake-Wilson and John O. Goyo for their work on defining the structure in [SECG1]. The authors would also like to thank Pasi Eronen, Alfred Hoenes, Joel Jaegglie, Avshalom Houri, Russ Housley, Jim Schaad, and Carl Wallace for their comments. Authors' Addresses Sean Turner IECA, Inc. 3057 Nutley Street, Suite 106 Fairfax, VA 22031 USA EMail: turners@ieca.com Daniel R. L. Brown Certicom Corp 5520 Explorer Drive #400 Mississauga, ON L4W 5L1 Canada EMail: dbrown@certicom.com