ftp.cc.uoc.gr
rfc7052
This is a purely informative rendering of an RFC that includes verified errata. This rendering may not be used as a reference.

The following 'Verified' errata have been incorporated in this document: EID 4235, EID 4256, EID 4304
Internet Engineering Task Force (IETF)                        G. Schudel
Request for Comments: 7052                                 Cisco Systems
Category: Experimental                                           A. Jain
ISSN: 2070-1721                                         Juniper Networks
                                                               V. Moreno
                                                           Cisco Systems
                                                            October 2013


               Locator/ID Separation Protocol (LISP) MIB

Abstract

   This document defines the MIB module that contains managed objects to
   support the monitoring devices of the Locator/ID Separation Protocol
   (LISP).  These objects provide information useful for monitoring LISP
   devices, including determining basic LISP configuration information,
   LISP functional status, and operational counters and other
   statistics.

Status of This Memo

   This document is not an Internet Standards Track specification; it is
   published for examination, experimental implementation, and
   evaluation.

   This document defines an Experimental Protocol for the Internet
   community.  This document is a product of the Internet Engineering
   Task Force (IETF).  It represents the consensus of the IETF
   community.  It has received public review and has been approved for
   publication by the Internet Engineering Steering Group (IESG).  Not
   all documents approved by the IESG are a candidate for any level of
   Internet Standard; see Section 2 of RFC 5741.

   Information about the current status of this document, any errata,
   and how to provide feedback on it may be obtained at
   http://www.rfc-editor.org/info/rfc7052.

Copyright Notice

   Copyright (c) 2013 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction . . . . . . . . . . . . . . . . . . . . . . . . .  3
   2.  Requirements Notation  . . . . . . . . . . . . . . . . . . . .  3
   3.  The Internet-Standard Management Framework . . . . . . . . . .  3
   4.  Definition of Terms  . . . . . . . . . . . . . . . . . . . . .  4
   5.  LISP MIB Objectives  . . . . . . . . . . . . . . . . . . . . .  5
   6.  Structure of LISP MIB Module . . . . . . . . . . . . . . . . .  5
     6.1.  Overview of Defined Notifications  . . . . . . . . . . . .  5
     6.2.  Overview of Defined Tables . . . . . . . . . . . . . . . .  5
   7.  LISP MIB Definitions . . . . . . . . . . . . . . . . . . . . .  7
   8.  Relationship to Other MIB Modules  . . . . . . . . . . . . . . 62
     8.1.  MIB Modules Required for IMPORTS . . . . . . . . . . . . . 62
   9.  Security Considerations  . . . . . . . . . . . . . . . . . . . 63
   10. IANA Considerations  . . . . . . . . . . . . . . . . . . . . . 64
   11. References . . . . . . . . . . . . . . . . . . . . . . . . . . 64
     11.1. Normative References . . . . . . . . . . . . . . . . . . . 64
     11.2. Informative References . . . . . . . . . . . . . . . . . . 65
   Appendix A.  Acknowledgments . . . . . . . . . . . . . . . . . . . 66

1.  Introduction

   This document describes the Management Information Base (MIB) module
   for use with network management protocols in the Internet community.
   Specifically, the MIB for managing devices that support the
   Locator/ID Separation Protocol (LISP) is described.

   LISP [RFC6830] specifies a network-based architecture and mechanisms
   that implement a new semantic for IP addressing using two separate
   name spaces: Endpoint Identifiers (EIDs), used within sites, and
   Routing Locators (RLOCs), used on the transit networks that make up
   the Internet infrastructure.  To achieve this separation, LISP
   defines protocol mechanisms for mapping from EIDs to RLOCs.

   From a data-plane perspective, LISP traffic is handled exclusively at
   the network layer by devices performing Ingress Tunnel Router (ITR)
   and Egress Tunnel Router (ETR) LISP functions.  Data-plane operations
   performed by these devices are described in [RFC6830].  Additionally,
   data-plane interworking between legacy (Internet) and LISP sites is
   implemented by devices performing Proxy ITR (PITR) and Proxy ETR
   (PETR) functions.  The data-plane operations of these devices is
   described in [RFC6832].

   From a control-plane perspective, LISP employs mechanisms related to
   creating, maintaining, and resolving mappings from EIDs to RLOCs.
   LISP ITRs, ETRs, PITRs, and PETRs perform specific control-plane
   functions, and these control-plane operations are described in
   [RFC6830].  Additionally, LISP infrastructure devices supporting LISP
   control-plane functionality include Map-Servers and Map-Resolvers,
   and the control-plane operations of these devices are described in
   [RFC6833].

2.  Requirements Notation

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
   "OPTIONAL" in this document are to be interpreted as described in
   [RFC2119].

3.  The Internet-Standard Management Framework

   For a detailed overview of the documents that describe the current
   Internet-Standard Management Framework, please refer to section 7 of
   RFC 3410 [RFC3410].

   Managed objects are accessed via a virtual information store, termed
   the Management Information Base or MIB.  MIB objects are generally
   accessed through the Simple Network Management Protocol (SNMP).

   Objects in the MIB are defined using the mechanisms defined in the
   Structure of Management Information (SMI).  This memo specifies a MIB
   module that is compliant to the SMIv2, which is described in STD 58,
   RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580
   [RFC2580].

4.  Definition of Terms

   This document does not define any new terms.  All terms used in this
   document are listed here for completeness; the authoritative
   definition of each term can be found in the definition section of the
   respective specified reference.

   Endpoint ID (EID):  [RFC6830]

   Routing Locator (RLOC):  [RFC6830]

   EID-to-RLOC Cache:  [RFC6830]

   EID-to-RLOC Database:  [RFC6830]

   Ingress Tunnel Router (ITR):  [RFC6830]

   Egress Tunnel Router (ETR):  [RFC6830]

   xTR:  [RFC6830]

   Proxy ITR (PITR):  [RFC6832]

   Proxy ETR (PETR):  [RFC6832]

   LISP Site:  [RFC6830]

   Map-Server:  [RFC6833]

   Map-Resolver:  [RFC6833]

   Map-Request:  [RFC6833]

   Map-Reply:  [RFC6833]

   Negative Map-Reply:  [RFC6833]

5.  LISP MIB Objectives

   The objectives for this LISP MIB module are to provide a read-only
   mechanism to support the following functions:

   o  Provide a means for obtaining (read-only) a current status of LISP
      features enabled on a device, and (read-only) a current status of
      configuration attributes related to those features.  As one
      example, this MIB could determine the ON/OFF status of LISP
      features such as ITR, ETR, PITR, PETR, MS, or MR support,
      specifically as related to IPv4 or IPv6 address families as well
      as the LISP Canonical Address Format (LCAF) [LCAF] with IANA
      assigned Address Family Number 16387.  Other examples could
      include obtaining the (read-only) status of whether RLOC-Probing
      is enabled, obtaining the status of whether the use of a PETR is
      configured, and obtaining the (read-only) values of other related
      attributes such as the map-cache limit value, or a mapping time-
      to-live (TTL) value.

   o  Provide a means for obtaining (read-only) the current attributes
      of various LISP tables, such as the EID-to-RLOC policy data
      contained in the map-cache, or the local EID-to-RLOC policy data
      contained in the mapping-database.

   o  Provide a means for obtaining (read-only) the current operational
      statistics of various LISP functions, such as the number of
      packets encapsulated and decapsulated by the device.  Other
      counters of operational interest, depending on LISP function,
      include things like the current number of map-cache entries, and
      the total number and rate of map-requests received and sent by the
      device.

6.  Structure of LISP MIB Module

6.1.  Overview of Defined Notifications

   No LISP MIB notifications are defined.

6.2.  Overview of Defined Tables

   The LISP MIB module is composed of the following tables of objects:

   lispFeatures -  This table provides information representing the
      various lisp features that can be enabled on LISP devices.

   lispIidToVrf -  This table provides information representing the
      mapping of a LISP Instance ID to a VRF (Virtual Routing and
      Forwarding).

   lispGlobalStats -  This table provides global statistics for a given
      Instance ID per address family on a LISP device.

   lispMappingDatabase -  This table represents the EID-to-RLOC database
      that contains the EID-Prefix to RLOC mappings configured on an
      ETR.  In general, this table would be representative of all such
      mappings for a given site to which this device belongs.

   lispMappingDatabaseLocator -  This table represents the set of
      routing locators contained in the EID-to-RLOC database configured
      on an ETR.

   lispMapCache -  This table represents the short-lived, on-demand
      table maintained on an ITR that stores, tracks, and times-out EID-
      to-RLOC mappings.

   lispMapCacheLocator -  This table represents the set of locators per
      EID-Prefix contained in the map-cache table of an ITR.

   lispConfiguredLocator -  This table represents the set of routing
      locators configured on a LISP device.

   lispEidRegistration -  This table provides the properties of each
      EID-Prefix that is registered with this device when configured to
      be a Map-Server.

   lispEidRegistrationEtr -  This table provides the properties of the
      different ETRs that send registers, for a given EID-Prefix, to
      this device when configured to be a Map-Server.

   lispEidRegistrationLocator -  This table provides the properties of
      the different locators per EID prefix that is registered with this
      device when configured to be a Map-Server.

   lispUseMapServer -  This table provides the properties of all Map-
      Servers that this device is configured to use.

   lispUseMapResolver -  This table provides the properties of all Map-
      Resolvers that this device is configured to use.

   lispUseProxyEtr -  This table provides the properties of all Proxy
      ETRs that this device is configured to use.

7.  LISP MIB Definitions

LISP-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE,
    mib-2, Unsigned32, Counter64,
    Integer32, TimeTicks            FROM SNMPv2-SMI        -- RFC 2578
    TruthValue, TEXTUAL-CONVENTION,
    TimeStamp                       FROM SNMPv2-TC         -- RFC 2579
    MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF       -- RFC 2580
    MplsL3VpnName
                 FROM MPLS-L3VPN-STD-MIB                   -- RFC 4382
    AddressFamilyNumbers
                 FROM IANA-ADDRESS-FAMILY-NUMBERS-MIB;
       -- http://www.iana.org/assignments/ianaaddressfamilynumbers-mib

lispMIB MODULE-IDENTITY
    LAST-UPDATED "201310210000Z" -- 21 October 2013
    ORGANIZATION
            "IETF Locator/ID Separation Protocol (LISP) Working Group"
    CONTACT-INFO
            "Email: lisp@ietf.org
             WG charter:
             http://datatracker.ietf.org/wg/lisp/charter/"
    DESCRIPTION
            "This MIB module contains managed objects to support
             monitoring devices that support the Locator/ID Separation
             Protocol (LISP).

             Copyright (c) 2013 IETF Trust and the persons identified
             as authors of the code.  All rights reserved.

             Redistribution and use in source and binary forms, with
             or without modification, is permitted pursuant to, and
             subject to the license terms contained in, the Simplified
             BSD License set forth in Section 4.c of the IETF Trust's
             Legal Provisions Relating to IETF Documents
             (http://trustee.ietf.org/license-info)."
    REVISION     "201310210000Z" -- 21 October 2013
    DESCRIPTION  "Initial version of the IETF LISP-MIB module.
                  Published as RFC 7052."
     ::= { mib-2 220 }

--
-- Textual Conventions
--

LispAddressType ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "39a"
    STATUS current
    DESCRIPTION
      "LISP architecture can be applied to a wide variety of
       address-families.  This textual-convention is a generalization
       for representing addresses belonging to those address-families.
       For convenience, this document refers to any such address as a
       LISP address.  LispAddressType textual-convention consists of
       the following four-tuple:
       1. IANA Address Family Number: A field of length 2 octets,
          whose value is of the form following the assigned
          AddressFamilyNumbers textual-convention described in
          IANA-ADDRESS-FAMILY-NUMBERS-MIB DEFINITIONS, available from
          http://www.iana.org/assignments/ianaaddressfamilynumbers-mib.
          The enumerations are also listed in [IANA].  Note that this
          list of address family numbers is maintained by IANA.
       2. Length of LISP address: A field of length 1 octet, whose
          value indicates the octet-length of the next (third)
          field of this LispAddressType four-tuple.
       3. LISP address: A field of variable length as indicated in
          the previous (second) field, whose value is an address
          of the IANA Address Family indicated in the first field
          of this LispAddressType four-tuple.  Note that any of
          the IANA Address Families can be represented.
          Particularly when the address family is LISP Canonical
          Address Format (LCAF)
          with IANA-assigned Address Family Number 16387, then the
          first octet of this field indicates the LCAF type, and the
          rest of this field is same as the encoding format of the
          LISP Canonical Address after the length field, as defined
          in LCAF document.
       4. Mask-length of address: A field of length 1 octet, whose
          value is the mask-length to be applied to the LISP
          address specified in the previous (third) field.

       To illustrate the use of this object, consider the LISP MIB
       Object below titled lispMapCacheEntry.  This object begins
       with the following entities:

       lispMapCacheEntry ::= SEQUENCE {
          lispMapCacheEidLength          INTEGER,
          lispMapCacheEid                LispAddressType,
           ... [skip] ...

       Example 1: Suppose that the IPv4 EID-Prefix stored is
       192.0.2.0/24.  In this case, the values within
       lispMapCacheEntry would be:

          lispMapCacheEidLength  = 8
          lispMapCacheEid = 1, 4, 192.0.2.0, 24
          ... [skip] ...

       where 8 is the total length in octets of the next object
       (lispMapCacheEID of type LispAddressType).  Then, the value
       1 indicates the IPv4 AF (per the
       IANA-ADDRESS-FAMILY-NUMBERS-MIB), the value 4 indicates that
       the AF is 4 octets in length, 192.0.2.0 is the IPv4 address,
       and the value 24 is the mask-length in bits.  Note that the
       lispMapCacheEidLength value of 8 is used to compute the
       length of the fourth (last) field in lispMapCacheEid to be 1
       octet -- as computed by 8 - (2 + 1 + 4) = 1.

       Example 2: Suppose that the IPv6 EID-Prefix stored is
       2001:db8:a::/48.  In this case, the values within
       lispMapCacheEntry would be:

          lispMapCacheEidLength  = 20
          lispMapCacheEid = 2, 16, 2001:db8:a::, 48
          ... [skip] ...

       where 20 is the total length in octets of the next object
       (lispMapCacheEID of type LispAddressType).  Then, the value
       2 indicates the IPv6 AF (per the
       IANA-ADDRESS-FAMILY-NUMBERS-MIB), the value 16 indicates
       that the AF is 16 octets in length, 2001:db8:a:: is the IPv6
       address, and the value 48 is the mask-length in bits.  Note
       that the lispMapCacheEidLength value of 20 is used to
       compute the length of the fourth (last) field in
       lispMapCacheEid to be 1 octet -- as computed by
       20 - (2 + 1 + 16) = 1.

              Example 3: As an example where LCAF is used, suppose 
       that the IPv4 EID-Prefix stored is 192.0.2.0/24 and it
       is part of LISP Instance ID 101.  In this case, the values
       within lispMapCacheEntry would be:

          lispMapCacheEidLength  = 14
          lispMapCacheEid = 16387, 10, 2, 101, 1, 192.0.2.0, 24
          ... [skip] ...

       where 14 is the total length in octets of the next object
       (lispMapCacheEID of type LispAddressType).  Then, the value
       16387 indicates the LCAF AF (see the
       IANA-ADDRESS-FAMILY-NUMBERS-MIB), the value 10 indicates that
       the LCAF AF is 10 octets in length in this case, 2 indicates
       that LCAF Type 2 encoding is used (see the LCAF document), 101
       gives the Instance ID, 1 gives the AFI (per the
       IANA-ADDRESS-FAMILY-NUMBERS-MIB) for an IPv4 address, 192.0.2.0
       is the IPv4 address, and 24 is the mask-length in bits.  Note
       that the lispMapCacheEidLength value of 14 octets is used to
       compute the length of the last field in lispMapCacheEid to be 1
       octet -- as computed by 14 - (2 + 1 + 1 + 3 + 2 + 4) = 1.

EID 4235 (Verified) is as follows:

Section: 7

Original Text:

       Example 3: As an example where LCAF is used, suppose
       that the IPv4 EID-Prefix stored is 192.0.2.0/24 and it
       is part of LISP Instance ID 101.  In this case, the values
       within lispMapCacheEntry would be:

          lispMapCacheEidLength  = 11
          lispMapCacheEid = 16387, 7, 2, 101, 1, 192.0.2.0, 24
          ... [skip] ...

       where 11 is the total length in octets of the next object
       (lispMapCacheEID of type LispAddressType).  Then, the value
       16387 indicates the LCAF AF (see the
       IANA-ADDRESS-FAMILY-NUMBERS-MIB), the value 7 indicates that
       the LCAF AF is 7 octets in length in this case, 2 indicates
       that LCAF Type 2 encoding is used (see the LCAF document), 101
       gives the Instance ID, 1 gives the AFI (per the
       IANA-ADDRESS-FAMILY-NUMBERS-MIB) for an IPv4 address, 192.0.2.0
       is the IPv4 address, and 24 is the mask-length in bits.  Note
       that the lispMapCacheEidLength value of 11 octets is used to
       compute the length of the last field in lispMapCacheEid to be 1
       octet -- as computed by 11 - (2 + 1 + 1 + 1 + 1 + 4) = 1.

Corrected Text:

       Example 3: As an example where LCAF is used, suppose
       that the IPv4 EID-Prefix stored is 192.0.2.0/24 and it
       is part of LISP Instance ID 101.  In this case, the values
       within lispMapCacheEntry would be:

          lispMapCacheEidLength  = 14
          lispMapCacheEid = 16387, 10, 2, 101, 1, 192.0.2.0, 24
          ... [skip] ...

       where 14 is the total length in octets of the next object
       (lispMapCacheEID of type LispAddressType).  Then, the value
       16387 indicates the LCAF AF (see the
       IANA-ADDRESS-FAMILY-NUMBERS-MIB), the value 10 indicates that
       the LCAF AF is 10 octets in length in this case, 2 indicates
       that LCAF Type 2 encoding is used (see the LCAF document), 101
       gives the Instance ID, 1 gives the AFI (per the
       IANA-ADDRESS-FAMILY-NUMBERS-MIB) for an IPv4 address, 192.0.2.0
       is the IPv4 address, and 24 is the mask-length in bits.  Note
       that the lispMapCacheEidLength value of 14 octets is used to
       compute the length of the last field in lispMapCacheEid to be 1
       octet -- as computed by 14 - (2 + 1 + 1 + 3 + 2 + 4) = 1.
Notes:
The Instance ID within the type 2 LCAF is 24 bits and requires 3 octets (incorrectly calculated as 1)
The AFI within the LCAF type 2 requires 2 octets (incorrectly calculated as 1)
Note: all LISP header formats and locations of specific flags, bits, and fields are as given in the base LISP references of RFC 6830, RFC 6832, and RFC 6833." REFERENCE "RFC 6830, Section 14.2 and LISP Canonical Address Format (LCAF), Work in Progress, March 2013." SYNTAX OCTET STRING (SIZE (0..39))
EID 4256 (Verified) is as follows:

Section: 7

Original Text:

    REFERENCE
        "RFC 6830, Section 14.2 and
         LISP Canonical Address Format (LCAF), Work in Progress,
         March 2013."
    SYNTAX OCTET STRING (SIZE (5..39))

Corrected Text:

    REFERENCE
        "RFC 6830, Section 14.2 and
         LISP Canonical Address Format (LCAF), Work in Progress,
         March 2013."
    SYNTAX OCTET STRING (SIZE (0..39))
Notes:
The minimum octet string length of 5 specified for the LispAddressType is incorrect. The smallest non-empty address is an IPv4 address that is not using the LCAF format to include an instance ID. This requires 8 octets (see example 1 above keeping in mind that the AFI requires 2 octets). However, in many places in the MIB definition the LispAddressType is used as the type for attributes where “unspecified” is a valid return. For example in lispEidRegistrationLastRegisterSender, an EID prefix that is configured on a Map-Server may not have any active registrations. To encode the absence of an address the minimum length of zero should be allowed.
-- -- Top-level components of this MIB. -- lispObjects OBJECT IDENTIFIER ::= { lispMIB 1 } lispConformance OBJECT IDENTIFIER ::= { lispMIB 2 } lispFeaturesTable OBJECT-TYPE SYNTAX SEQUENCE OF LispFeaturesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table represents the ON/OFF status of the various LISP features that can be enabled on LISP devices." REFERENCE "RFC 6830, Section 4, Section 5.5., Section 6.3." ::= { lispObjects 1 } lispFeaturesEntry OBJECT-TYPE SYNTAX LispFeaturesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the lispFeaturesTable." INDEX { lispFeaturesInstanceID, lispFeaturesAddressFamily } ::= { lispFeaturesTable 1 } LispFeaturesEntry ::= SEQUENCE { lispFeaturesInstanceID Unsigned32, lispFeaturesAddressFamily AddressFamilyNumbers, lispFeaturesItrEnabled TruthValue, lispFeaturesEtrEnabled TruthValue, lispFeaturesProxyItrEnabled TruthValue, lispFeaturesProxyEtrEnabled TruthValue, lispFeaturesMapServerEnabled TruthValue, lispFeaturesMapResolverEnabled TruthValue, lispFeaturesMapCacheSize Unsigned32, lispFeaturesMapCacheLimit Unsigned32, lispFeaturesEtrMapCacheTtl Unsigned32, lispFeaturesRlocProbeEnabled TruthValue, lispFeaturesEtrAcceptMapDataEnabled TruthValue, lispFeaturesEtrAcceptMapDataVerifyEnabled TruthValue, lispFeaturesRouterTimeStamp TimeStamp } lispFeaturesInstanceID OBJECT-TYPE SYNTAX Unsigned32 (0..16777215) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This represents the Instance ID of the LISP header. An Instance ID in the LISP address encoding helps uniquely identify the AFI-based address space to which a given EID belongs. Its default value is 0." DEFVAL { 0 } ::= { lispFeaturesEntry 1 } lispFeaturesAddressFamily OBJECT-TYPE SYNTAX AddressFamilyNumbers MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IANA Address Family Number of destination address of packets that this LISP device is enabled to process." ::= { lispFeaturesEntry 2 } lispFeaturesItrEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the status of ITR role on this device. If this object is true, then the ITR feature is enabled." ::= { lispFeaturesEntry 3 } lispFeaturesEtrEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the status of ETR role on this device. If this object is true, then the ETR feature is enabled." ::= { lispFeaturesEntry 4 } lispFeaturesProxyItrEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the status of Proxy-ITR role on this device. If this object is true, then the Proxy-ITR feature is enabled." ::= { lispFeaturesEntry 5 } lispFeaturesProxyEtrEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the status of Proxy-ETR role on this device. If this object is true, then the Proxy-ETR feature is enabled." ::= { lispFeaturesEntry 6 } lispFeaturesMapServerEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the status of Map Server role on this device. If this object is true, then the Map-Server feature is enabled." ::= { lispFeaturesEntry 7 } lispFeaturesMapResolverEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the status of Map Resolver role on this device. If this object is true, then Map-Resolver feature is enabled." ::= { lispFeaturesEntry 8 } lispFeaturesMapCacheSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Size of EID-to-RLOC map-cache on this device." ::= { lispFeaturesEntry 9 } lispFeaturesMapCacheLimit OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum permissible entries in EID-to-RLOC map-cache on this device." ::= { lispFeaturesEntry 10 } lispFeaturesEtrMapCacheTtl OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The stored Record TTL of the EID-to-RLOC map record in the map-cache." ::= { lispFeaturesEntry 11 } lispFeaturesRlocProbeEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the status of RLOC-Probing feature on this device. If this object is true, then this feature is enabled." ::= { lispFeaturesEntry 12 } lispFeaturesEtrAcceptMapDataEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the status of accepting piggybacked mapping data received in a map-request on this device. If this object is true, then this device accepts piggybacked mapping data." ::= { lispFeaturesEntry 13 } lispFeaturesEtrAcceptMapDataVerifyEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the status of verifying accepted piggybacked mapping data received in a map-request on this device. If this object is true, then this device verifies accepted piggybacked mapping data." ::= { lispFeaturesEntry 14 } lispFeaturesRouterTimeStamp OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at which the LISP feature was enabled on this device. If this information was present at the most recent reinitialization of the local management subsystem, then this object contains a zero value." DEFVAL { 0 } ::= { lispFeaturesEntry 15 } lispIidToVrfTable OBJECT-TYPE SYNTAX SEQUENCE OF LispIidToVrfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table represents the mapping of a LISP Instance ID to a VRF." REFERENCE "RFC 6830, Section 5.5., and RFC 4382, Section 7." ::= { lispObjects 2 } lispIidToVrfEntry OBJECT-TYPE SYNTAX LispIidToVrfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the lispIidToVrfTable." INDEX { lispFeaturesInstanceID } ::= { lispIidToVrfTable 1 } LispIidToVrfEntry ::= SEQUENCE { lispIidToVrfName MplsL3VpnName } lispIidToVrfName OBJECT-TYPE SYNTAX MplsL3VpnName MAX-ACCESS read-only STATUS current DESCRIPTION "The identifier for each VPN that is mapped to the given LISP Instance ID." ::= { lispIidToVrfEntry 1 } lispGlobalStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF LispGlobalStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides global statistics for a given Instance ID per address family on a LISP device." REFERENCE "RFC 6830, Section 6.1." ::= { lispObjects 3 } lispGlobalStatsEntry OBJECT-TYPE SYNTAX LispGlobalStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the lispGlobalStatsTable." INDEX { lispFeaturesInstanceID, lispFeaturesAddressFamily } ::= { lispGlobalStatsTable 1 } LispGlobalStatsEntry ::= SEQUENCE { lispGlobalStatsMapRequestsIn Counter64, lispGlobalStatsMapRequestsOut Counter64, lispGlobalStatsMapRepliesIn Counter64, lispGlobalStatsMapRepliesOut Counter64, lispGlobalStatsMapRegistersIn Counter64, lispGlobalStatsMapRegistersOut Counter64 } lispGlobalStatsMapRequestsIn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of map requests received by this device for any EID-Prefix of the given address family and Instance ID. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of LISP features being removed, which can be detected by observing the value of lispFeaturesRouterTimeStamp." ::= { lispGlobalStatsEntry 1 } lispGlobalStatsMapRequestsOut OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of map requests sent by this device for any EID-Prefix of the given address family and Instance ID. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of LISP features being removed, which can be detected by observing the value of lispFeaturesRouterTimeStamp." ::= { lispGlobalStatsEntry 2 } lispGlobalStatsMapRepliesIn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of map replies received by this device for any EID-Prefix of the given address family and Instance ID. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of LISP features being removed, which can be detected by observing the value of lispFeaturesRouterTimeStamp." ::= { lispGlobalStatsEntry 3 } lispGlobalStatsMapRepliesOut OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of map replies sent by this device for any EID prefix of the given address family and Instance ID. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of LISP features being removed, which can be detected by observing the value of lispFeaturesRouterTimeStamp." ::= { lispGlobalStatsEntry 4 } lispGlobalStatsMapRegistersIn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of map registers received by this device for any EID-Prefix of the given address family and Instance ID. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of LISP features being removed, which can be detected by observing the value of lispFeaturesRouterTimeStamp." ::= { lispGlobalStatsEntry 5 } lispGlobalStatsMapRegistersOut OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of map registers sent by this device for any EID-Prefix of the given address family and Instance ID. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of LISP features being removed, which can be detected by observing the value of lispFeaturesRouterTimeStamp." ::= { lispGlobalStatsEntry 6 } lispMappingDatabaseTable OBJECT-TYPE SYNTAX SEQUENCE OF LispMappingDatabaseEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table represents the EID-to-RLOC mapping database that contains the EID-Prefix to RLOC mappings configured on an ETR. This table represents all such mappings for the given LISP site to which this device belongs." REFERENCE "RFC 6830, Section 6." ::= { lispObjects 4 } lispMappingDatabaseEntry OBJECT-TYPE SYNTAX LispMappingDatabaseEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in lispMappingDatabaseTable." INDEX { lispMappingDatabaseEidLength, lispMappingDatabaseEid } ::= { lispMappingDatabaseTable 1 } LispMappingDatabaseEntry ::= SEQUENCE { lispMappingDatabaseEidLength Integer32, lispMappingDatabaseEid LispAddressType, lispMappingDatabaseLsb Unsigned32, lispMappingDatabaseEidPartitioned TruthValue, lispMappingDatabaseTimeStamp TimeStamp, lispMappingDatabaseDecapOctets Counter64, lispMappingDatabaseDecapPackets Counter64, lispMappingDatabaseEncapOctets Counter64, lispMappingDatabaseEncapPackets Counter64 } lispMappingDatabaseEidLength OBJECT-TYPE SYNTAX Integer32 (5..39) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object gives the octet-length of lispMappingDatabaseEid." ::= { lispMappingDatabaseEntry 1 } lispMappingDatabaseEid OBJECT-TYPE SYNTAX LispAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The EID-Prefix of the mapping database." ::= { lispMappingDatabaseEntry 2 } lispMappingDatabaseLsb OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The locator status bits for this EID-Prefix." ::= { lispMappingDatabaseEntry 3 } lispMappingDatabaseEidPartitioned OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if this device is partitioned from the site that contains this EID-Prefix. If this object is true, then it means this device is partitioned from the site." ::= { lispMappingDatabaseEntry 4 } lispMappingDatabaseTimeStamp OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at which the EID Prefix information represented by this mapping database entry was configured on this device. If this information was present at the most recent reinitialization of the local management subsystem, then this object contains a zero value." DEFVAL { 0 } ::= { lispMappingDatabaseEntry 5 } lispMappingDatabaseDecapOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets, after decapsulation, of LISP packets that were decapsulated by this device addressed to a host within this EID-Prefix. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of LISP features being removed, which can be detected by observing the value of lispMappingDatabaseTimeStamp." ::= { lispMappingDatabaseEntry 6 } lispMappingDatabaseDecapPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of LISP packets that were decapsulated by this device addressed to a host within this EID-Prefix. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of LISP features being removed, which can be detected by observing the value of lispMappingDatabaseTimeStamp." ::= { lispMappingDatabaseEntry 7 } lispMappingDatabaseEncapOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets, before encapsulation, of LISP packets that were encapsulated by this device, whose inner header source address matched this EID-Prefix. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of LISP features being removed, which can be detected by observing the value of lispMappingDatabaseTimeStamp." ::= { lispMappingDatabaseEntry 8 } lispMappingDatabaseEncapPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of LISP packets that were encapsulated by this device whose inner header source address matched this EID prefix. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of LISP features being removed, which can be detected by observing the value of lispMappingDatabaseTimeStamp." ::= { lispMappingDatabaseEntry 9 } lispMappingDatabaseLocatorTable OBJECT-TYPE SYNTAX SEQUENCE OF LispMappingDatabaseLocatorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table represents the set of routing locators per EID prefix contained in the EID-to-RLOC database configured on this ETR." REFERENCE "RFC 6830, Section 6.2." ::= { lispObjects 5 } lispMappingDatabaseLocatorEntry OBJECT-TYPE SYNTAX LispMappingDatabaseLocatorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the lispMappingDatabaseLocatorTable." INDEX { lispMappingDatabaseEidLength, lispMappingDatabaseEid, lispMappingDatabaseLocatorRlocLength, lispMappingDatabaseLocatorRloc } ::= { lispMappingDatabaseLocatorTable 1 } LispMappingDatabaseLocatorEntry ::= SEQUENCE { lispMappingDatabaseLocatorRlocLength Integer32, lispMappingDatabaseLocatorRloc LispAddressType, lispMappingDatabaseLocatorRlocPriority Integer32, lispMappingDatabaseLocatorRlocWeight Integer32, lispMappingDatabaseLocatorRlocMPriority Integer32, lispMappingDatabaseLocatorRlocMWeight Integer32, lispMappingDatabaseLocatorRlocState INTEGER, lispMappingDatabaseLocatorRlocLocal INTEGER, lispMappingDatabaseLocatorRlocTimeStamp TimeStamp, lispMappingDatabaseLocatorRlocDecapOctets Counter64, lispMappingDatabaseLocatorRlocDecapPackets Counter64, lispMappingDatabaseLocatorRlocEncapOctets Counter64, lispMappingDatabaseLocatorRlocEncapPackets Counter64 } lispMappingDatabaseLocatorRlocLength OBJECT-TYPE SYNTAX Integer32 (5..39) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is used to get the octet-length of lispMappingDatabaseLocatorRloc." ::= { lispMappingDatabaseLocatorEntry 1 } lispMappingDatabaseLocatorRloc OBJECT-TYPE SYNTAX LispAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is a locator for the given EID-Prefix in the mapping database." ::= { lispMappingDatabaseLocatorEntry 2 } lispMappingDatabaseLocatorRlocPriority OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The unicast priority of the RLOC." ::= { lispMappingDatabaseLocatorEntry 3 } lispMappingDatabaseLocatorRlocWeight OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "The unicast weight of the RLOC." ::= { lispMappingDatabaseLocatorEntry 4 } lispMappingDatabaseLocatorRlocMPriority OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The multicast priority of the RLOC." ::= { lispMappingDatabaseLocatorEntry 5 } lispMappingDatabaseLocatorRlocMWeight OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "The multicast weight of the RLOC." ::= { lispMappingDatabaseLocatorEntry 6 } lispMappingDatabaseLocatorRlocState OBJECT-TYPE SYNTAX INTEGER { up (1), down (2), unreachable (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of this RLOC as per this device. (1 = RLOC is up; 2 = RLOC is down; 3 = RLOC is unreachable)." ::= { lispMappingDatabaseLocatorEntry 7 } lispMappingDatabaseLocatorRlocLocal OBJECT-TYPE SYNTAX INTEGER { siteself (1), sitelocal (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the RLOC is local to this device (or remote, meaning local to another device in the same LISP site). (1 = RLOC is an address on this device; 2 = RLOC is an address on another device)." ::= { lispMappingDatabaseLocatorEntry 8 } lispMappingDatabaseLocatorRlocTimeStamp OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at which the RLOC of the EID Prefix represented by this mapping database entry was configured on this device. If this information was present at the most recent reinitialization of the local management subsystem, then this object contains a zero value." DEFVAL { 0 } ::= { lispMappingDatabaseLocatorEntry 9 } lispMappingDatabaseLocatorRlocDecapOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets of LISP packets that were addressed to this RLOC of the EID-Prefix and were decapsulated. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of database mappings getting reconfigured or RLOC status changes, which can be detected by observing the value of lispMappingDatabaseLocatorRlocTimeStamp." ::= { lispMappingDatabaseLocatorEntry 10 } lispMappingDatabaseLocatorRlocDecapPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of LISP packets that were addressed to this RLOC of the EID-Prefix and were decapsulated. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of database mappings getting reconfigured or RLOC status changes, which can be detected by observing the value of lispMappingDatabaseLocatorRlocTimeStamp." ::= { lispMappingDatabaseLocatorEntry 11 } lispMappingDatabaseLocatorRlocEncapOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets of LISP packets that were encapsulated by this device using this RLOC address as the source, and that were sourced by an address of this EID-Prefix. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of database mappings getting reconfigured or RLOC status changes, which can be detected by observing the value of lispMappingDatabaseLocatorRlocTimeStamp." ::= { lispMappingDatabaseLocatorEntry 12 } lispMappingDatabaseLocatorRlocEncapPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of LISP packets that were encapsulated by this device using this RLOC address as the source and that were sourced by an address of this EID-Prefix. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of database mappings getting reconfigured or RLOC status changes, which can be detected by observing the value of lispMappingDatabaseLocatorRlocTimeStamp." ::= { lispMappingDatabaseLocatorEntry 13 } lispMapCacheTable OBJECT-TYPE SYNTAX SEQUENCE OF LispMapCacheEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table represents the short-lived, on-demand table on an ITR that stores, tracks, and is responsible for timing-out and otherwise validating EID-to-RLOC mappings." REFERENCE "RFC 6830, Sections 6 and Section 12." ::= { lispObjects 6 } lispMapCacheEntry OBJECT-TYPE SYNTAX LispMapCacheEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the lispMapCacheTable." INDEX { lispMapCacheEidLength, lispMapCacheEid } ::= { lispMapCacheTable 1 } LispMapCacheEntry ::= SEQUENCE { lispMapCacheEidLength Integer32, lispMapCacheEid LispAddressType, lispMapCacheEidTimeStamp TimeStamp, lispMapCacheEidExpiryTime TimeTicks, lispMapCacheEidState TruthValue, lispMapCacheEidAuthoritative TruthValue, lispMapCacheEidDecapOctets Counter64, lispMapCacheEidDecapPackets Counter64, lispMapCacheEidEncapOctets Counter64, lispMapCacheEidEncapPackets Counter64 } lispMapCacheEidLength OBJECT-TYPE SYNTAX Integer32 (5..39) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is used to get the octet-length of lispMapCacheEid." ::= { lispMapCacheEntry 1 } lispMapCacheEid OBJECT-TYPE SYNTAX LispAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The EID-Prefix in the mapping cache." ::= { lispMapCacheEntry 2 } lispMapCacheEidTimeStamp OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at which the EID Prefix information represented by this entry was learned by this device. If this information was present at the most recent reinitialization of the local management subsystem, then this object contains a zero value." DEFVAL { 0 } ::= { lispMapCacheEntry 3 } lispMapCacheEidExpiryTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time remaining before the ITR times-out this EID-Prefix." ::= { lispMapCacheEntry 4 } lispMapCacheEidState OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used to indicate the activity of this EID prefix. If this object is true, then it means this EID prefix is seeing activity." ::= { lispMapCacheEntry 5 } lispMapCacheEidAuthoritative OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used to indicate whether the EID-Prefix was installed by an authoritative map-reply. If this object is true, then it means this EID-Prefix was installed by an authoritative map-reply." ::= { lispMapCacheEntry 6 } lispMapCacheEidDecapOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets of LISP packets that were decapsulated by this device and were sourced from a remote host within this EID-Prefix. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of cache being removed and replaced, which can be detected by observing the value of lispMapCacheEidTimeStamp." ::= { lispMapCacheEntry 7 } lispMapCacheEidDecapPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of LISP packets that were decapsulated by this device and were sourced from a remote host within this EID-Prefix. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of cache being removed and replaced, which can be detected by observing the value of lispMapCacheEidTimeStamp." ::= { lispMapCacheEntry 8 } lispMapCacheEidEncapOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets of LISP packets that were encapsulated by this device using the given EID-Prefix in the map-cache. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of cache being removed and replaced, which can be detected by observing the value of lispMapCacheEidTimeStamp." ::= { lispMapCacheEntry 9 } lispMapCacheEidEncapPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of LISP packets that were encapsulated by this device using the given EID-Prefix in the map-cache. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of cache being removed and replaced, which can be detected by observing the value of lispMapCacheEidTimeStamp." ::= { lispMapCacheEntry 10 } lispMapCacheLocatorTable OBJECT-TYPE SYNTAX SEQUENCE OF LispMapCacheLocatorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table represents the set of locators per EID-Prefix contained in the map-cache table of an ITR." REFERENCE "RFC 6830, Section 6.3." ::= { lispObjects 7 } lispMapCacheLocatorEntry OBJECT-TYPE SYNTAX LispMapCacheLocatorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the lispMapCacheLocatorTable." INDEX { lispMapCacheEidLength, lispMapCacheEid, lispMapCacheLocatorRlocLength, lispMapCacheLocatorRloc } ::= { lispMapCacheLocatorTable 1 } LispMapCacheLocatorEntry ::= SEQUENCE { lispMapCacheLocatorRlocLength Integer32, lispMapCacheLocatorRloc LispAddressType, lispMapCacheLocatorRlocPriority Integer32, lispMapCacheLocatorRlocWeight Integer32, lispMapCacheLocatorRlocMPriority Integer32, lispMapCacheLocatorRlocMWeight Integer32, lispMapCacheLocatorRlocState INTEGER, lispMapCacheLocatorRlocTimeStamp TimeStamp, lispMapCacheLocatorRlocLastPriorityChange TimeTicks, lispMapCacheLocatorRlocLastWeightChange TimeTicks, lispMapCacheLocatorRlocLastMPriorityChange TimeTicks, lispMapCacheLocatorRlocLastMWeightChange TimeTicks, lispMapCacheLocatorRlocLastStateChange TimeTicks, lispMapCacheLocatorRlocRtt TimeTicks, lispMapCacheLocatorRlocDecapOctets Counter64, lispMapCacheLocatorRlocDecapPackets Counter64, lispMapCacheLocatorRlocEncapOctets Counter64, lispMapCacheLocatorRlocEncapPackets Counter64 } lispMapCacheLocatorRlocLength OBJECT-TYPE SYNTAX Integer32 (5..39) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is used to get the octet-length of lispMapCacheLocatorRloc." ::= { lispMapCacheLocatorEntry 1 } lispMapCacheLocatorRloc OBJECT-TYPE SYNTAX LispAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The locator for the EID-Prefix in the mapping cache." ::= { lispMapCacheLocatorEntry 2 } lispMapCacheLocatorRlocPriority OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The unicast priority of the RLOC for this EID-Prefix (0-255); lower is more preferred." ::= { lispMapCacheLocatorEntry 3 } lispMapCacheLocatorRlocWeight OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "The unicast weight of the RLOC for this EID-Prefix (0 - 100) percentage." ::= { lispMapCacheLocatorEntry 4 } lispMapCacheLocatorRlocMPriority OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The multicast priority of the RLOC for this EID-Prefix (0-255); lower is more preferred." ::= { lispMapCacheLocatorEntry 5 } lispMapCacheLocatorRlocMWeight OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "The multicast weight of the RLOC for this EID-Prefix (0 - 100) percentage." ::= { lispMapCacheLocatorEntry 6 } lispMapCacheLocatorRlocState OBJECT-TYPE SYNTAX INTEGER { up (1), down (2), unreachable (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of this RLOC as per this device (1 = RLOC is up; 2 = RLOC is down; 3 = RLOC is unreachable)." ::= { lispMapCacheLocatorEntry 7 } lispMapCacheLocatorRlocTimeStamp OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at which the RLOC of EID-Prefix information represented by this entry was learned by this device. If this information was present at the most recent reinitialization of the local management subsystem, then this object contains a zero value." DEFVAL { 0 } ::= { lispMapCacheLocatorEntry 8 } lispMapCacheLocatorRlocLastPriorityChange OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Time elapsed since the last change of the unicast priority of the RLOC for this EID-Prefix. Note that this is independent of lispMapCacheLocatorRlocTimeStamp." ::= { lispMapCacheLocatorEntry 9 } lispMapCacheLocatorRlocLastWeightChange OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Time elapsed since the last change of the unicast weight of the RLOC for this EID-Prefix. Note that this is independent of lispMapCacheLocatorRlocTimeStamp." ::= { lispMapCacheLocatorEntry 10 } lispMapCacheLocatorRlocLastMPriorityChange OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Time since the last change of the multicast priority of the RLOC for this EID-Prefix." ::= { lispMapCacheLocatorEntry 11 } lispMapCacheLocatorRlocLastMWeightChange OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Time since the last change of the multicast weight of the RLOC for this EID-Prefix." ::= { lispMapCacheLocatorEntry 12 } lispMapCacheLocatorRlocLastStateChange OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Time since the last change of the up/down state of the RLOC for this EID-Prefix." ::= { lispMapCacheLocatorEntry 13 } lispMapCacheLocatorRlocRtt OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Round-trip time of RLOC probe and map-reply for this RLOC address for this prefix." ::= { lispMapCacheLocatorEntry 14 } lispMapCacheLocatorRlocDecapOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets of LISP packets that were decapsulated by this device and were sourced from a remote host within this EID-Prefix and were encapsulated for this RLOC. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of RLOC of cache being removed and replaced, which can be detected by observing the value of lispMapCacheLocatorRlocTimeStamp." ::= { lispMapCacheLocatorEntry 15 } lispMapCacheLocatorRlocDecapPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of LISP packets that were decapsulated by this device and were sourced from a remote host within this EID-Prefix and were encapsulated for this RLOC. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of RLOC of cache being removed and replaced, which can be detected by observing the value of lispMapCacheLocatorRlocTimeStamp." ::= { lispMapCacheLocatorEntry 16 } lispMapCacheLocatorRlocEncapOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets of LISP packets that matched this EID-Prefix and were encapsulated using this RLOC address. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of RLOC of cache being removed and replaced, which can be detected by observing the value of lispMapCacheLocatorRlocTimeStamp." ::= { lispMapCacheLocatorEntry 17 } lispMapCacheLocatorRlocEncapPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of LISP packets that matched this EID-Prefix and were encapsulated using this RLOC address. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of RLOC of cache being removed and replaced, which can be detected by observing the value of lispMapCacheLocatorRlocTimeStamp." ::= { lispMapCacheLocatorEntry 18 } lispConfiguredLocatorTable OBJECT-TYPE SYNTAX SEQUENCE OF LispConfiguredLocatorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table represents the set of routing locators configured on this device. Note that the addresses configured by Proxy-ITR are treated as routing locators and therefore can be part of this table." REFERENCE "RFC 6830, Section 6.3." ::= { lispObjects 8 } lispConfiguredLocatorEntry OBJECT-TYPE SYNTAX LispConfiguredLocatorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the lispConfiguredLocatorTable." INDEX { lispConfiguredLocatorRlocLength, lispConfiguredLocatorRloc } ::= { lispConfiguredLocatorTable 1 } LispConfiguredLocatorEntry ::= SEQUENCE { lispConfiguredLocatorRlocLength Integer32, lispConfiguredLocatorRloc LispAddressType, lispConfiguredLocatorRlocState INTEGER, lispConfiguredLocatorRlocLocal INTEGER, lispConfiguredLocatorRlocTimeStamp TimeStamp, lispConfiguredLocatorRlocDecapOctets Counter64, lispConfiguredLocatorRlocDecapPackets Counter64, lispConfiguredLocatorRlocEncapOctets Counter64, lispConfiguredLocatorRlocEncapPackets Counter64 } lispConfiguredLocatorRlocLength OBJECT-TYPE SYNTAX Integer32 (5..39) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is used to get the octet-length of lispConfiguredLocatorRloc." ::= { lispConfiguredLocatorEntry 1 } lispConfiguredLocatorRloc OBJECT-TYPE SYNTAX LispAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is an RLOC address configured on this device. It can be an RLOC that is local to this device or can be an RLOC that belongs to another ETR within the same site. Proxy-ITR address is treated as an RLOC." ::= { lispConfiguredLocatorEntry 2 } lispConfiguredLocatorRlocState OBJECT-TYPE SYNTAX INTEGER { up (1), down (2), unreachable (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of this RLOC as per this device. (1 = RLOC is up; 2 = RLOC is down; 3 = RLOC is unreachable)." ::= { lispConfiguredLocatorEntry 3 } lispConfiguredLocatorRlocLocal OBJECT-TYPE SYNTAX INTEGER { siteself (1), sitelocal (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the RLOC is local to this device (or remote, meaning local to another device in the same LISP site). (1 = RLOC is an address on this device; 2 = RLOC is an address on another device)." ::= { lispConfiguredLocatorEntry 4 } lispConfiguredLocatorRlocTimeStamp OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at which the RLOC was configured on this device. If this information was present at the most recent reinitialization of the local management subsystem, then this object contains a zero value." DEFVAL { 0 } ::= { lispConfiguredLocatorEntry 5 } lispConfiguredLocatorRlocDecapOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets of LISP packets that were addressed to this RLOC and were decapsulated. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of configured RLOC being removed and replaced, which can be detected by observing the value of lispConfiguredLocatorRlocTimeStamp." ::= { lispConfiguredLocatorEntry 6 } lispConfiguredLocatorRlocDecapPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of LISP packets that were addressed to this RLOC and were decapsulated. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of configured RLOC being removed and replaced, which can be detected by observing the value of lispConfiguredLocatorRlocTimeStamp." ::= { lispConfiguredLocatorEntry 7 } lispConfiguredLocatorRlocEncapOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets of LISP packets that were encapsulated by this device using this RLOC address as the source. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of configured RLOC being removed and replaced, which can be detected by observing the value of lispConfiguredLocatorRlocTimeStamp." ::= { lispConfiguredLocatorEntry 8 } lispConfiguredLocatorRlocEncapPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of LISP packets that were encapsulated by this device using this RLOC address as the source. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of configured RLOC being removed and replaced, which can be detected by observing the value of lispConfiguredLocatorRlocTimeStamp." ::= { lispConfiguredLocatorEntry 9 } lispEidRegistrationTable OBJECT-TYPE SYNTAX SEQUENCE OF LispEidRegistrationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides the properties of each LISP EID-Prefix that is registered with this device when configured to be a Map-Server." REFERENCE "RFC 6833, Section 4." ::= { lispObjects 9 } lispEidRegistrationEntry OBJECT-TYPE SYNTAX LispEidRegistrationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the lispEidRegistrationTable." INDEX { lispEidRegistrationEidLength, lispEidRegistrationEid } ::= { lispEidRegistrationTable 1 } LispEidRegistrationEntry ::= SEQUENCE { lispEidRegistrationEidLength Integer32, lispEidRegistrationEid LispAddressType, lispEidRegistrationSiteName OCTET STRING, lispEidRegistrationSiteDescription OCTET STRING, lispEidRegistrationIsRegistered TruthValue, lispEidRegistrationFirstTimeStamp TimeStamp, lispEidRegistrationLastTimeStamp TimeStamp, lispEidRegistrationLastRegisterSenderLength Integer32, lispEidRegistrationLastRegisterSender LispAddressType, lispEidRegistrationAuthenticationErrors Counter64, lispEidRegistrationRlocsMismatch Counter64 } lispEidRegistrationEidLength OBJECT-TYPE SYNTAX Integer32 (5..39) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is used to get the octet-length of lispEidRegistrationEid." ::= { lispEidRegistrationEntry 1 } lispEidRegistrationEid OBJECT-TYPE SYNTAX LispAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The EID-Prefix that is being registered." ::= { lispEidRegistrationEntry 2 } lispEidRegistrationSiteName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Site name used by a Map-Server to distinguish different LISP sites that are registering with it." ::= { lispEidRegistrationEntry 3 } lispEidRegistrationSiteDescription OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Description for a site name used by a Map-Server. The EID prefix that is being registered belongs to this site." ::= { lispEidRegistrationEntry 4 } lispEidRegistrationIsRegistered OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the registration status of the given EID-Prefix. If this object is true, then it means the EID-Prefix is registered. The value false implies the EID-Prefix is not registered with the Map Server. There are multiple scenarios when this could happen like authentication failures, routing problems, misconfigs to name a few." ::= { lispEidRegistrationEntry 5 } lispEidRegistrationFirstTimeStamp OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at which the first valid register message for the EID Prefix information represented by this entry was received by this device. If this information was present at the most recent reinitialization of the local management subsystem, then this object contains a zero value." DEFVAL { 0 } ::= { lispEidRegistrationEntry 6 } lispEidRegistrationLastTimeStamp OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at which the last valid register message for the EID Prefix information represented by this entry was received by this device. If this information was present at the most recent reinitialization of the local management subsystem, then this object contains a zero value." DEFVAL { 0 } ::= { lispEidRegistrationEntry 7 } lispEidRegistrationLastRegisterSenderLength OBJECT-TYPE SYNTAX Integer32 (0..39) MAX-ACCESS read-only
EID 4304 (Verified) is as follows:

Section: 7

Original Text:

   lispEidRegistrationLastRegisterSenderLength OBJECT-TYPE
       SYNTAX     Integer32 (5..39)
       MAX-ACCESS read-only

Corrected Text:

   lispEidRegistrationLastRegisterSenderLength OBJECT-TYPE
       SYNTAX     Integer32 (0..39)
       MAX-ACCESS read-only
Notes:
The lispEidRegistrationLastRegisterSender is the only use of the LispAddressType in a readable attribute. In order to be able to encode an unspecified address, the minimum length must be lowered to zero. For more information see errata 4256.
STATUS current DESCRIPTION "This object is used to get the octet-length of lispEidRegistrationLastRegisterSender, the next object." ::= { lispEidRegistrationEntry 8 } lispEidRegistrationLastRegisterSender OBJECT-TYPE SYNTAX LispAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "Source address of the last valid register message for the given EID-Prefix that was received by this device." ::= { lispEidRegistrationEntry 9 } lispEidRegistrationAuthenticationErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of total authentication errors of map-registers received for the given EID-Prefix. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of site config changes, which can be detected by observing the value of lispEidRegistrationFirstTimeStamp." ::= { lispEidRegistrationEntry 10 } lispEidRegistrationRlocsMismatch OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of total map-registers received that had at least one RLOC that was not in the allowed list of RLOCs for the given EID-Prefix. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of site config changes, which can be detected by observing the value of lispEidRegistrationFirstTimeStamp." ::= { lispEidRegistrationEntry 11 } lispEidRegistrationEtrTable OBJECT-TYPE SYNTAX SEQUENCE OF LispEidRegistrationEtrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides the properties of ETRs that register the given EID-Prefix with this device when configured to be a Map-Server." REFERENCE "RFC 6830, Section 6.1." ::= { lispObjects 10 } lispEidRegistrationEtrEntry OBJECT-TYPE SYNTAX LispEidRegistrationEtrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the lispEidRegistrationEtrTable." INDEX { lispEidRegistrationEidLength, lispEidRegistrationEid, lispEidRegistrationEtrSenderLength, lispEidRegistrationEtrSender } ::= { lispEidRegistrationEtrTable 1 } LispEidRegistrationEtrEntry ::= SEQUENCE { lispEidRegistrationEtrSenderLength Integer32, lispEidRegistrationEtrSender LispAddressType, lispEidRegistrationEtrLastTimeStamp TimeStamp, lispEidRegistrationEtrTtl Unsigned32, lispEidRegistrationEtrProxyReply TruthValue, lispEidRegistrationEtrWantsMapNotify TruthValue } lispEidRegistrationEtrSenderLength OBJECT-TYPE SYNTAX Integer32 (5..39) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is used to get the octet-length of lispEidRegistrationEtrSender." ::= { lispEidRegistrationEtrEntry 1 } lispEidRegistrationEtrSender OBJECT-TYPE SYNTAX LispAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Source address of the ETR that is sending valid register messages for this EID-Prefix to this device." ::= { lispEidRegistrationEtrEntry 2 } lispEidRegistrationEtrLastTimeStamp OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at which the last valid register message from this ETR for the EID Prefix information represented by this entry was received by this device. If this information was present at the most recent reinitialization of the local management subsystem, then this object contains a zero value." DEFVAL { 0 } ::= { lispEidRegistrationEtrEntry 3 } lispEidRegistrationEtrTtl OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Record TTL of the registering ETR device for this EID-Prefix." ::= { lispEidRegistrationEtrEntry 4 } lispEidRegistrationEtrProxyReply OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates proxy-replying status of the registering ETR for this EID-Prefix. If this object is true, then it means the Map-Server can proxy-reply." ::= { lispEidRegistrationEtrEntry 5 } lispEidRegistrationEtrWantsMapNotify OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the EID-Prefix wants Map-Notifications. If this object is true, then it means the EID-Prefix wants Map-Notifications." ::= { lispEidRegistrationEtrEntry 6 } lispEidRegistrationLocatorTable OBJECT-TYPE SYNTAX SEQUENCE OF LispEidRegistrationLocatorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides the properties of all locators per LISP site that are served by this device when configured to be a Map-Server." REFERENCE "RFC 6830, Section 6.1." ::= { lispObjects 11 } lispEidRegistrationLocatorEntry OBJECT-TYPE SYNTAX LispEidRegistrationLocatorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the lispEidRegistrationLocatorTable." INDEX { lispEidRegistrationEidLength, lispEidRegistrationEid, lispEidRegistrationEtrSenderLength, lispEidRegistrationEtrSender, lispEidRegistrationLocatorRlocLength, lispEidRegistrationLocatorRloc } ::= { lispEidRegistrationLocatorTable 1 } LispEidRegistrationLocatorEntry ::= SEQUENCE { lispEidRegistrationLocatorRlocLength Integer32, lispEidRegistrationLocatorRloc LispAddressType, lispEidRegistrationLocatorRlocState INTEGER, lispEidRegistrationLocatorIsLocal TruthValue, lispEidRegistrationLocatorPriority Integer32, lispEidRegistrationLocatorWeight Integer32, lispEidRegistrationLocatorMPriority Integer32, lispEidRegistrationLocatorMWeight Integer32 } lispEidRegistrationLocatorRlocLength OBJECT-TYPE SYNTAX Integer32 (5..39) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is used to get the octet-length of lispEidRegistrationLocatorRloc." ::= { lispEidRegistrationLocatorEntry 1 } lispEidRegistrationLocatorRloc OBJECT-TYPE SYNTAX LispAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The locator of the given EID-Prefix being registered by the given ETR with this device." ::= { lispEidRegistrationLocatorEntry 2 } lispEidRegistrationLocatorRlocState OBJECT-TYPE SYNTAX INTEGER { up (1), down (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The cached state of this RLOC received in map-register from the ETR by the device, in the capacity of a Map-Server. Value 1 refers to up, value 2 refers to down." ::= { lispEidRegistrationLocatorEntry 3 } lispEidRegistrationLocatorIsLocal OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if the given locator is local to the registering ETR. If this object is true, it means the locator is local." ::= { lispEidRegistrationLocatorEntry 4 } lispEidRegistrationLocatorPriority OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The unicast priority of the RLOC for this EID-Prefix in the register message sent by the given ETR." ::= { lispEidRegistrationLocatorEntry 5 } lispEidRegistrationLocatorWeight OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "The unicast weight of the RLOC for this EID-Prefix in the register message sent by the given ETR." ::= { lispEidRegistrationLocatorEntry 6 } lispEidRegistrationLocatorMPriority OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The multicast priority of the RLOC for this EID-Prefix in the register message sent by the given ETR." ::= { lispEidRegistrationLocatorEntry 7 } lispEidRegistrationLocatorMWeight OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "The multicast weight of the RLOC for this EID-Prefix in the register message sent by the given ETR." ::= { lispEidRegistrationLocatorEntry 8 } lispUseMapServerTable OBJECT-TYPE SYNTAX SEQUENCE OF LispUseMapServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides the properties of the Map-Server(s) with which this device is configured to register." REFERENCE "RFC 6833, Section 4.3." ::= { lispObjects 12 } lispUseMapServerEntry OBJECT-TYPE SYNTAX LispUseMapServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the lispUseMapServerTable." INDEX { lispUseMapServerAddressLength, lispUseMapServerAddress } ::= { lispUseMapServerTable 1 } LispUseMapServerEntry ::= SEQUENCE { lispUseMapServerAddressLength Integer32, lispUseMapServerAddress LispAddressType, lispUseMapServerState INTEGER } lispUseMapServerAddressLength OBJECT-TYPE SYNTAX Integer32 (5..39) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is used to get the octet-length of lispUseMapServerAddress." ::= { lispUseMapServerEntry 1 } lispUseMapServerAddress OBJECT-TYPE SYNTAX LispAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Address of a Map-Server configured on this device." ::= { lispUseMapServerEntry 2 } lispUseMapServerState OBJECT-TYPE SYNTAX INTEGER { up (1), down (2), unreachable (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "State of this Map-Server configured on this device (1 = Map-Server is up; 2 = Map-Server is down)." ::= { lispUseMapServerEntry 3 } lispUseMapResolverTable OBJECT-TYPE SYNTAX SEQUENCE OF LispUseMapResolverEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides the properties of the Map-Resolver(s) this device is configured to use." REFERENCE "RFC 6833, Section 4.4." ::= { lispObjects 13 } lispUseMapResolverEntry OBJECT-TYPE SYNTAX LispUseMapResolverEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the lispUseMapResolverTable." INDEX { lispUseMapResolverAddressLength, lispUseMapResolverAddress } ::= { lispUseMapResolverTable 1 } LispUseMapResolverEntry ::= SEQUENCE { lispUseMapResolverAddressLength Integer32, lispUseMapResolverAddress LispAddressType, lispUseMapResolverState INTEGER } lispUseMapResolverAddressLength OBJECT-TYPE SYNTAX Integer32 (5..39) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is used to get the octet-length of lispUseMapResolverAddress." ::= { lispUseMapResolverEntry 1 } lispUseMapResolverAddress OBJECT-TYPE SYNTAX LispAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Address of Map-Resolver configured on this device." ::= { lispUseMapResolverEntry 2 } lispUseMapResolverState OBJECT-TYPE SYNTAX INTEGER { up (1), down (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "State of this Map-Resolver configured on this device (1 = Map-Resolver is up; 2 = Map-Resolver is down)." ::= { lispUseMapResolverEntry 3 } lispUseProxyEtrTable OBJECT-TYPE SYNTAX SEQUENCE OF LispUseProxyEtrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides the properties of all Proxy ETRs that this device is configured to use." REFERENCE "RFC 6830, Section 6." ::= { lispObjects 14 } lispUseProxyEtrEntry OBJECT-TYPE SYNTAX LispUseProxyEtrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the lispUseProxyEtrTable." INDEX { lispUseProxyEtrAddressLength, lispUseProxyEtrAddress } ::= { lispUseProxyEtrTable 1 } LispUseProxyEtrEntry ::= SEQUENCE { lispUseProxyEtrAddressLength Integer32, lispUseProxyEtrAddress LispAddressType, lispUseProxyEtrPriority Integer32, lispUseProxyEtrWeight Integer32, lispUseProxyEtrMPriority Integer32, lispUseProxyEtrMWeight Integer32, lispUseProxyEtrState INTEGER } lispUseProxyEtrAddressLength OBJECT-TYPE SYNTAX Integer32 (5..39) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is used to get the octet-length of lispUseProxyEtrAddress." ::= { lispUseProxyEtrEntry 1 } lispUseProxyEtrAddress OBJECT-TYPE SYNTAX LispAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Address of Proxy ETR configured on this device." ::= { lispUseProxyEtrEntry 2 } lispUseProxyEtrPriority OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The unicast priority of the PETR locator." ::= { lispUseProxyEtrEntry 3 } lispUseProxyEtrWeight OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "The unicast weight of the PETR locator." ::= { lispUseProxyEtrEntry 4 } lispUseProxyEtrMPriority OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The multicast priority of the PETR locator." ::= { lispUseProxyEtrEntry 5 } lispUseProxyEtrMWeight OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "The multicast weight of the PETR locator." ::= { lispUseProxyEtrEntry 6 } lispUseProxyEtrState OBJECT-TYPE SYNTAX INTEGER { down (0), up (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "State of this Proxy ETR configured on this device (0 = Proxy ETR is down; 1 = Proxy ETR is up)." ::= { lispUseProxyEtrEntry 7 } -- -- Conformance Information -- lispCompliances OBJECT IDENTIFIER ::= { lispConformance 1 } lispGroups OBJECT IDENTIFIER ::= { lispConformance 2 } -- -- Compliance Statements -- lispMIBComplianceEtr MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for LISP ETRs. It conveys whether the device supports the ETR feature, and, if so, the relevant state associated with that feature." MODULE -- this module MANDATORY-GROUPS { lispMIBEtrGroup } GROUP lispMIBItrGroup DESCRIPTION "This group is optional." GROUP lispMIBPetrGroup DESCRIPTION "This group is optional." GROUP lispMIBPitrGroup DESCRIPTION "This group is optional." GROUP lispMIBMapServerGroup DESCRIPTION "This group is optional." GROUP lispMIBMapResolverGroup DESCRIPTION "This group is optional." GROUP lispMIBEtrExtendedGroup DESCRIPTION "This group is optional." GROUP lispMIBItrExtendedGroup DESCRIPTION "This group is optional." GROUP lispMIBMapServerExtendedGroup DESCRIPTION "This group is optional." GROUP lispMIBTuningParametersGroup DESCRIPTION "This group is optional." GROUP lispMIBEncapStatisticsGroup DESCRIPTION "This group is optional." GROUP lispMIBDecapStatisticsGroup DESCRIPTION "This group is optional." GROUP lispMIBDiagnosticsGroup DESCRIPTION "This group is optional." GROUP lispMIBVrfGroup DESCRIPTION "This group is optional." ::= { lispCompliances 1 } lispMIBComplianceItr MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for LISP ITRs. It conveys whether the device supports the ITR feature, and, if so, the relevant state associated with that feature." MODULE -- this module MANDATORY-GROUPS { lispMIBItrGroup } GROUP lispMIBEtrGroup DESCRIPTION "This group is optional." GROUP lispMIBPetrGroup DESCRIPTION "This group is optional." GROUP lispMIBPitrGroup DESCRIPTION "This group is optional." GROUP lispMIBMapServerGroup DESCRIPTION "This group is optional." GROUP lispMIBMapResolverGroup DESCRIPTION "This group is optional." GROUP lispMIBEtrExtendedGroup DESCRIPTION "This group is optional." GROUP lispMIBItrExtendedGroup DESCRIPTION "This group is optional." GROUP lispMIBMapServerExtendedGroup DESCRIPTION "This group is optional." GROUP lispMIBTuningParametersGroup DESCRIPTION "This group is optional." GROUP lispMIBEncapStatisticsGroup DESCRIPTION "This group is optional." GROUP lispMIBDecapStatisticsGroup DESCRIPTION "This group is optional." GROUP lispMIBDiagnosticsGroup DESCRIPTION "This group is optional." GROUP lispMIBVrfGroup DESCRIPTION "This group is optional." ::= { lispCompliances 2 } lispMIBCompliancePetr MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for LISP Proxy-ETRs. It conveys whether the device supports the Proxy-ETR feature, and, if so, the relevant state associated with that feature." MODULE -- this module MANDATORY-GROUPS { lispMIBPetrGroup } GROUP lispMIBEtrGroup DESCRIPTION "This group is optional." GROUP lispMIBItrGroup DESCRIPTION "This group is optional." GROUP lispMIBPitrGroup DESCRIPTION "This group is optional." GROUP lispMIBMapServerGroup DESCRIPTION "This group is optional." GROUP lispMIBMapResolverGroup DESCRIPTION "This group is optional." GROUP lispMIBEtrExtendedGroup DESCRIPTION "This group is optional." GROUP lispMIBItrExtendedGroup DESCRIPTION "This group is optional." GROUP lispMIBMapServerExtendedGroup DESCRIPTION "This group is optional." GROUP lispMIBTuningParametersGroup DESCRIPTION "This group is optional." GROUP lispMIBEncapStatisticsGroup DESCRIPTION "This group is optional." GROUP lispMIBDecapStatisticsGroup DESCRIPTION "This group is optional." GROUP lispMIBDiagnosticsGroup DESCRIPTION "This group is optional." GROUP lispMIBVrfGroup DESCRIPTION "This group is optional." ::= { lispCompliances 3 } lispMIBCompliancePitr MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for LISP Proxy-ITRs. It conveys whether the device supports the Proxy-ITR feature, and, if so, the relevant state associated with that feature." MODULE -- this module MANDATORY-GROUPS { lispMIBPitrGroup } GROUP lispMIBEtrGroup DESCRIPTION "This group is optional." GROUP lispMIBItrGroup DESCRIPTION "This group is optional." GROUP lispMIBPetrGroup DESCRIPTION "This group is optional." GROUP lispMIBMapServerGroup DESCRIPTION "This group is optional." GROUP lispMIBMapResolverGroup DESCRIPTION "This group is optional." GROUP lispMIBEtrExtendedGroup DESCRIPTION "This group is optional." GROUP lispMIBItrExtendedGroup DESCRIPTION "This group is optional." GROUP lispMIBMapServerExtendedGroup DESCRIPTION "This group is optional." GROUP lispMIBTuningParametersGroup DESCRIPTION "This group is optional." GROUP lispMIBEncapStatisticsGroup DESCRIPTION "This group is optional." GROUP lispMIBDecapStatisticsGroup DESCRIPTION "This group is optional." GROUP lispMIBDiagnosticsGroup DESCRIPTION "This group is optional." GROUP lispMIBVrfGroup DESCRIPTION "This group is optional." ::= { lispCompliances 4 } lispMIBComplianceMapServer MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for LISP Map Servers. It conveys whether the device supports the Map Server feature, and, if so, the relevant state associated with that feature." MODULE -- this module MANDATORY-GROUPS { lispMIBMapServerGroup } GROUP lispMIBEtrGroup DESCRIPTION "This group is optional." GROUP lispMIBItrGroup DESCRIPTION "This group is optional." GROUP lispMIBPetrGroup DESCRIPTION "This group is optional." GROUP lispMIBPitrGroup DESCRIPTION "This group is optional." GROUP lispMIBMapResolverGroup DESCRIPTION "This group is optional." GROUP lispMIBEtrExtendedGroup DESCRIPTION "This group is optional." GROUP lispMIBItrExtendedGroup DESCRIPTION "This group is optional." GROUP lispMIBMapServerExtendedGroup DESCRIPTION "This group is optional." GROUP lispMIBTuningParametersGroup DESCRIPTION "This group is optional." GROUP lispMIBEncapStatisticsGroup DESCRIPTION "This group is optional." GROUP lispMIBDecapStatisticsGroup DESCRIPTION "This group is optional." GROUP lispMIBDiagnosticsGroup DESCRIPTION "This group is optional." GROUP lispMIBVrfGroup DESCRIPTION "This group is optional." ::= { lispCompliances 5 } lispMIBComplianceMapResolver MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for LISP Map Resolvers. It conveys whether the device supports the Map Resolver feature, and, if so, the relevant state associated with that feature." MODULE -- this module MANDATORY-GROUPS { lispMIBMapResolverGroup } GROUP lispMIBEtrGroup DESCRIPTION "This group is optional." GROUP lispMIBItrGroup DESCRIPTION "This group is optional." GROUP lispMIBPetrGroup DESCRIPTION "This group is optional." GROUP lispMIBPitrGroup DESCRIPTION "This group is optional." GROUP lispMIBMapServerGroup DESCRIPTION "This group is optional." GROUP lispMIBEtrExtendedGroup DESCRIPTION "This group is optional." GROUP lispMIBItrExtendedGroup DESCRIPTION "This group is optional." GROUP lispMIBMapServerExtendedGroup DESCRIPTION "This group is optional." GROUP lispMIBTuningParametersGroup DESCRIPTION "This group is optional." GROUP lispMIBEncapStatisticsGroup DESCRIPTION "This group is optional." GROUP lispMIBDecapStatisticsGroup DESCRIPTION "This group is optional." GROUP lispMIBDiagnosticsGroup DESCRIPTION "This group is optional." GROUP lispMIBVrfGroup DESCRIPTION "This group is optional." ::= { lispCompliances 6 } -- -- Units of Conformance -- lispMIBEtrGroup OBJECT-GROUP OBJECTS { lispFeaturesEtrEnabled, lispMappingDatabaseLsb, lispMappingDatabaseLocatorRlocPriority, lispMappingDatabaseLocatorRlocWeight, lispMappingDatabaseLocatorRlocMPriority, lispMappingDatabaseLocatorRlocMWeight, lispMappingDatabaseLocatorRlocState, lispMappingDatabaseLocatorRlocLocal, lispConfiguredLocatorRlocState, lispConfiguredLocatorRlocLocal, lispUseMapServerState } STATUS current DESCRIPTION "A collection of objects to support reporting of basic LISP ETR parameters." ::= { lispGroups 1 } lispMIBItrGroup OBJECT-GROUP OBJECTS { lispFeaturesItrEnabled, lispFeaturesMapCacheSize, lispMappingDatabaseLsb, lispMapCacheLocatorRlocPriority, lispMapCacheLocatorRlocWeight, lispMapCacheLocatorRlocMPriority, lispMapCacheLocatorRlocMWeight, lispMapCacheLocatorRlocState, lispMapCacheEidTimeStamp, lispMapCacheEidExpiryTime, lispUseMapResolverState, lispUseProxyEtrPriority, lispUseProxyEtrWeight, lispUseProxyEtrMPriority, lispUseProxyEtrMWeight, lispUseProxyEtrState } STATUS current DESCRIPTION "A collection of objects to support reporting of basic LISP ITR parameters." ::= { lispGroups 2 } lispMIBPetrGroup OBJECT-GROUP OBJECTS { lispFeaturesProxyEtrEnabled } STATUS current DESCRIPTION "A collection of objects to support reporting of basic LISP Proxy-ETR parameters." ::= { lispGroups 3 } lispMIBPitrGroup OBJECT-GROUP OBJECTS { lispFeaturesProxyItrEnabled, lispConfiguredLocatorRlocState, lispConfiguredLocatorRlocLocal } STATUS current DESCRIPTION "A collection of objects to support reporting of basic LISP Proxy-ITR parameters." ::= { lispGroups 4 } lispMIBMapServerGroup OBJECT-GROUP OBJECTS { lispFeaturesMapServerEnabled, lispEidRegistrationIsRegistered, lispEidRegistrationLocatorRlocState } STATUS current DESCRIPTION "A collection of objects to support reporting of basic LISP Map Server parameters." ::= { lispGroups 5 } lispMIBMapResolverGroup OBJECT-GROUP OBJECTS { lispFeaturesMapResolverEnabled } STATUS current DESCRIPTION "A collection of objects to support reporting of basic LISP Map Resolver parameters." ::= { lispGroups 6 } lispMIBEtrExtendedGroup OBJECT-GROUP OBJECTS { lispFeaturesRlocProbeEnabled, lispFeaturesEtrAcceptMapDataEnabled, lispFeaturesEtrAcceptMapDataVerifyEnabled, lispMappingDatabaseEidPartitioned } STATUS current DESCRIPTION "A collection of objects to support reporting of LISP features and properties on ETRs." ::= { lispGroups 7 } lispMIBItrExtendedGroup OBJECT-GROUP OBJECTS { lispFeaturesRlocProbeEnabled, lispMapCacheEidState, lispMapCacheEidAuthoritative, lispMapCacheLocatorRlocTimeStamp, lispMapCacheLocatorRlocLastPriorityChange, lispMapCacheLocatorRlocLastWeightChange, lispMapCacheLocatorRlocLastMPriorityChange, lispMapCacheLocatorRlocLastMWeightChange, lispMapCacheLocatorRlocLastStateChange, lispMapCacheLocatorRlocRtt } STATUS current DESCRIPTION "A collection of objects to support reporting of LISP features and properties on ITRs." ::= { lispGroups 8 } lispMIBMapServerExtendedGroup OBJECT-GROUP OBJECTS { lispEidRegistrationSiteName, lispEidRegistrationSiteDescription, lispEidRegistrationIsRegistered, lispEidRegistrationFirstTimeStamp, lispEidRegistrationLastTimeStamp, lispEidRegistrationLastRegisterSenderLength, lispEidRegistrationLastRegisterSender, lispEidRegistrationEtrLastTimeStamp, lispEidRegistrationEtrTtl, lispEidRegistrationEtrProxyReply, lispEidRegistrationEtrWantsMapNotify, lispEidRegistrationLocatorIsLocal, lispEidRegistrationLocatorPriority, lispEidRegistrationLocatorWeight, lispEidRegistrationLocatorMPriority, lispEidRegistrationLocatorMWeight } STATUS current DESCRIPTION "A collection of objects to support the reporting of LISP features and properties on Map Servers related to EID registrations." ::= { lispGroups 9 } lispMIBTuningParametersGroup OBJECT-GROUP OBJECTS { lispFeaturesMapCacheLimit, lispFeaturesEtrMapCacheTtl } STATUS current DESCRIPTION "A collection of objects used to support the reporting of parameters used to control LISP behavior and to tune performance." ::= { lispGroups 10 } lispMIBEncapStatisticsGroup OBJECT-GROUP OBJECTS { lispMappingDatabaseTimeStamp, lispMappingDatabaseEncapOctets, lispMappingDatabaseEncapPackets, lispMappingDatabaseLocatorRlocTimeStamp, lispMappingDatabaseLocatorRlocEncapOctets, lispMappingDatabaseLocatorRlocEncapPackets, lispMapCacheEidTimeStamp, lispMapCacheEidEncapOctets, lispMapCacheEidEncapPackets, lispMapCacheLocatorRlocTimeStamp, lispMapCacheLocatorRlocEncapOctets, lispMapCacheLocatorRlocEncapPackets, lispConfiguredLocatorRlocTimeStamp, lispConfiguredLocatorRlocEncapOctets, lispConfiguredLocatorRlocEncapPackets } STATUS current DESCRIPTION "A collection of objects used to support the reporting of LISP encapsulation statistics for the device." ::= { lispGroups 11 } lispMIBDecapStatisticsGroup OBJECT-GROUP OBJECTS { lispMappingDatabaseTimeStamp, lispMappingDatabaseDecapOctets, lispMappingDatabaseDecapPackets, lispMappingDatabaseLocatorRlocTimeStamp, lispMappingDatabaseLocatorRlocDecapOctets, lispMappingDatabaseLocatorRlocDecapPackets, lispMapCacheEidTimeStamp, lispMapCacheEidDecapOctets, lispMapCacheEidDecapPackets, lispMapCacheLocatorRlocTimeStamp, lispMapCacheLocatorRlocDecapOctets, lispMapCacheLocatorRlocDecapPackets, lispConfiguredLocatorRlocTimeStamp, lispConfiguredLocatorRlocDecapOctets, lispConfiguredLocatorRlocDecapPackets } STATUS current DESCRIPTION "A collection of objects used to support the reporting of LISP decapsulation statistics for the device." ::= { lispGroups 12 } lispMIBDiagnosticsGroup OBJECT-GROUP OBJECTS { lispFeaturesRouterTimeStamp, lispGlobalStatsMapRequestsIn, lispGlobalStatsMapRequestsOut, lispGlobalStatsMapRepliesIn, lispGlobalStatsMapRepliesOut, lispGlobalStatsMapRegistersIn, lispGlobalStatsMapRegistersOut, lispEidRegistrationAuthenticationErrors, lispEidRegistrationRlocsMismatch } STATUS current DESCRIPTION "A collection of objects used to support the reporting of additional diagnostics related to the LISP control-plane state of a LISP device." ::= { lispGroups 13 } lispMIBVrfGroup OBJECT-GROUP OBJECTS { lispIidToVrfName } STATUS current DESCRIPTION "A collection of objects used to support reporting of VRF-related information on a LISP device." ::= { lispGroups 14 } END 8. Relationship to Other MIB Modules 8.1. MIB Modules Required for IMPORTS The LISP MIB imports the TEXTUAL-CONVENTION AddressFamilyNumbers from the IANA-ADDRESS-FAMILY-NUMBERS-MIB DEFINITIONS [IANA]. The LISP MIB imports mib-2, Unsigned32, Counter64, Integer32, and TimeTicks from SNMPv2-SMI -- [RFC2578]. The LISP MIB imports TruthValue, TEXTUAL-CONVENTION, TimeStamp, and TimeTicks from SNMPv2-TC -- [RFC2579]. The LISP MIB imports MODULE-COMPLIANCE from SNMPv2-TC -- [RFC2580]. The LISP MIB imports MplsL3VpnName from MPLS-L3VPN-STD-MIB -- [RFC4382]. 9. Security Considerations There are no management objects defined in this MIB module that have a MAX-ACCESS clause of read-write and/or read-create. So, if this MIB module is implemented correctly, then there is no risk that an intruder can alter or create any management objects of this MIB module via direct SNMP SET operations. There are no readable objects in this MIB module (i.e., objects with a MAX-ACCESS other than not-accessible) that are considered sensitive. SNMP versions prior to SNMPv3 did not include adequate security. Even if the network itself is secure (for example by using IPsec), there is no control as to who on the secure network is allowed to access and GET/SET (read/change/create/delete) the objects in this MIB module. Implementations SHOULD provide the security features described by the SNMPv3 framework (see [RFC3410]), and implementations claiming compliance to the SNMPv3 standard MUST include full support for authentication and privacy via the User-based Security Model (USM) [RFC3414] with the AES cipher algorithm [RFC3826]. Implementations MAY also provide support for the Transport Security Model (TSM) [RFC5591] in combination with a secure transport such as SSH [RFC5592] or TLS/DTLS [RFC6353]. Further, deployment of SNMP versions prior to SNMPv3 is NOT RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to enable cryptographic security. It is then a customer/operator responsibility to ensure that the SNMP entity giving access to an instance of this MIB module is properly configured to give access to the objects only to those principals (users) that have legitimate rights to indeed GET or SET (change/create/delete) them. 10. IANA Considerations The MIB module in this document uses the following IANA-assigned OBJECT IDENTIFIER values recorded in the SMI Numbers registry: Descriptor OBJECT IDENTIFIER value ---------- ----------------------- lispMIB { mib-2 220 } IANA has allocated a new value in the "SMI Network Management MGMT Codes Internet-standard MIB" subregistry of the "Network Management Parameters" registry, according to the following registration data: Decimal: 220 Name: lispMIB Description: Locator/ID Separation Protocol (LISP) References: [RFC7052] 11. References 11.1. Normative References [IANA] IANA, "IANA-ADDRESS-FAMILY-NUMBERS-MIB DEFINITIONS", <http://www.iana.org/assignments/ ianaaddressfamilynumbers-mib>. [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [RFC2578] McCloghrie, K., Ed., Perkins, D., Ed., and J. Schoenwaelder, Ed., "Structure of Management Information Version 2 (SMIv2)", STD 58, RFC 2578, April 1999. [RFC2579] McCloghrie, K., Ed., Perkins, D., Ed., and J. Schoenwaelder, Ed., "Textual Conventions for SMIv2", STD 58, RFC 2579, April 1999. [RFC2580] McCloghrie, K., Perkins, D., and J. Schoenwaelder, "Conformance Statements for SMIv2", STD 58, RFC 2580, April 1999. [RFC3414] Blumenthal, U. and B. Wijnen, "User-based Security Model (USM) for version 3 of the Simple Network Management Protocol (SNMPv3)", STD 62, RFC 3414, December 2002. [RFC3826] Blumenthal, U., Maino, F., and K. McCloghrie, "The Advanced Encryption Standard (AES) Cipher Algorithm in the SNMP User-based Security Model", RFC 3826, June 2004. [RFC4382] Nadeau, T. and H. van der Linde, "MPLS/BGP Layer 3 Virtual Private Network (VPN) Management Information Base", RFC 4382, February 2006. [RFC5591] Harrington, D. and W. Hardaker, "Transport Security Model for the Simple Network Management Protocol (SNMP)", RFC 5591, June 2009. [RFC5592] Harrington, D., Salowey, J., and W. Hardaker, "Secure Shell Transport Model for the Simple Network Management Protocol (SNMP)", RFC 5592, June 2009. [RFC6353] Hardaker, W., "Transport Layer Security (TLS) Transport Model for the Simple Network Management Protocol (SNMP)", RFC 6353, July 2011. [RFC6830] Farinacci, D., Fuller, V., Meyer, D., and D. Lewis, "The Locator/ID Separation Protocol (LISP)", RFC 6830, January 2013. [RFC6832] Lewis, D., Meyer, D., Farinacci, D., and V. Fuller, "Interworking between Locator/ID Separation Protocol (LISP) and Non-LISP Sites", RFC 6832, January 2013. [RFC6833] Fuller, V. and D. Farinacci, "Locator/ID Separation Protocol (LISP) Map-Server Interface", RFC 6833, January 2013. 11.2. Informative References [LCAF] Farinacci, D., Meyer, D., and J. Snijders, "LISP Canonical Address Format (LCAF)", Work in Progress, September 2013. [RFC3410] Case, J., Mundy, R., Partain, D., and B. Stewart, "Introduction and Applicability Statements for Internet- Standard Management Framework", RFC 3410, December 2002. Appendix A. Acknowledgments A thank you is owed to Dino Farinacci for his input, review, and comments on the initial versions of this document. In addition, the authors would like to gratefully acknowledge several others who have reviewed and commented on this document. They include Darrel Lewis, Isidor Kouvelas, Jesper Skriver, Selina Heimlich, Parna Agrawal, Dan Romascanu, and Luigi Iannone. Special thanks are owed to Brian Haberman, the Internet Area AD, for his very detailed review; Miguel Garcia for reviewing this document as part of the General Area Review Team; and Harrie Hazewinkel for the detailed MIB review and comments. Authors' Addresses Gregg Schudel Cisco Systems Tasman Drive San Jose, CA 95134 USA EMail: gschudel@cisco.com Amit Jain Juniper Networks 1133 Innovation Way Sunnyvale, CA 94089 USA EMail: atjain@juniper.net Victor Moreno Cisco Systems Tasman Drive San Jose, CA 95134 USA EMail: vimoreno@cisco.com